Slacko B5
hi all
playdayz, the new tor keeps freezing, but your earlier tor pets dont have this problem (time is set to utc) will keep trying.
try pburn 3.4.1 as I have not had the freezing with this version (thanks zigbert)
hope this helps
don
edited to add: freezing seems only to be happening in fullscreen mode, I am posting this edit from the new tor
playdayz, the new tor keeps freezing, but your earlier tor pets dont have this problem (time is set to utc) will keep trying.
try pburn 3.4.1 as I have not had the freezing with this version (thanks zigbert)
hope this helps
don
edited to add: freezing seems only to be happening in fullscreen mode, I am posting this edit from the new tor
Last edited by Stripe on Mon 03 Oct 2011, 18:41, edited 1 time in total.
Hmmm, The only thing I have seen make it freeze is the time thing. Hey Stripe, Have you run Psync? Have you run the first run wizard and set your time zone?the new tor keeps freezing, but your earlier tor pets dont have this problem (time is set to utc) will keep trying.
You are testing on Slacko B5 I assume? Did the other tor pets work in Slacko or was it Lucid?
In B++ the ati fglrx driver seems to work fine on my HD 3850.
-----------------------------------------------------------------------------------------------
There was some weirdness in creating the save file on first boot from CD. Some code showed up on one screen during the save process and I also saw a quick modprobe fatal error message." However, the save file was created and it worked on reboot.
_________________________________________________________________
More -> I tested the same pet in Lucid and it worked full screen. There are no extra libraries added to the pet, so that isn't the problem. I still have no clue. Does anyone?
The same problem happens in B5 and B5++. Firefox 7.0.1 does not have the problem in itself--but that is a custom version that TOR is using. The previous version of TOR using FF 6.0.1 had the same problem in B5 andB5++. I even checked the previous 1.x version of Tor-browser bundle and it had the same problem.
-----------------------------------------------------------------------------------------------
There was some weirdness in creating the save file on first boot from CD. Some code showed up on one screen during the save process and I also saw a quick modprobe fatal error message." However, the save file was created and it worked on reboot.
_________________________________________________________________
Yes Stripe, I see what you mean. I tried some older versions and they did the same thing. I never tested that in Lucid, so I will do that. What a bizarre bug. I don't have any clue what to do about it.the new tor seems to be working fine as long as I dont run it fullscreen
More -> I tested the same pet in Lucid and it worked full screen. There are no extra libraries added to the pet, so that isn't the problem. I still have no clue. Does anyone?
The same problem happens in B5 and B5++. Firefox 7.0.1 does not have the problem in itself--but that is a custom version that TOR is using. The previous version of TOR using FF 6.0.1 had the same problem in B5 andB5++. I even checked the previous 1.x version of Tor-browser bundle and it had the same problem.
tried the tor pet on B5++ and initially it connected but opened to about 3/4 screen. clicking to full screen would open to full display then clicking a link it appeared to stall. clicking to change full view to partial revealed the destination page.
tor's version of ff is only that OOB saving cookies is disabled otherwise it's the same iirc.
----
noticed b5++ does not save multi-sound card selection even after reboot and even after closing gnome-mplayer and clicking on another movie need to re-input audio output.
tor's version of ff is only that OOB saving cookies is disabled otherwise it's the same iirc.
----
noticed b5++ does not save multi-sound card selection even after reboot and even after closing gnome-mplayer and clicking on another movie need to re-input audio output.
libs
Hi Sigmund,
I appreciate your lib hunting, however at this late stage I am not changing anything, unless it's a bug.
I have severe unexpected time constraints approaching and I can't spend time on recompiling mplayer, gnome-mplayer and such.
Hopefully a future release can exclude mplayer and offer a full featured version in the repo. At the moment though there is no other program small enough to play DVDs, maybe ffplay will get that capability. Actually, you can play a dvd in ffplay but it's tricky.
BTW, pburn-3.4.1 seems fine to me, no X crashes yet, and IIRC Jim1911 reports success copying a DVD, he didn't mention though if he shrank it.
-
Stripe and DaveS, I reported the lack of unsquashing to Barry, I'm positive it's woof, however I can fix it if it's not. A bit later, not at my machine ATM.
-
Playdayz, thanks for tor package and testing radeon in 5++. I'll package latest JWM soon to see if that is any remedy for FS issues.
-
Indian - sorry mate, haven't got a driver for you yet, stay tuned, I'll PM you when I have one.
-
Charlie, I haven't studied your siliconmotion issue yet, will do today, fix will likely be included.
-
Transmission will likely be dumped from Slickpet in favour of TOR, this has been my idea for awhile and there is a comment in the Slickpet en_US lang file to translate this, LOC_TOR. The transmission on the iso is a tiny older version, it works ok, the one in Slickpet (to be PPM) requires libevent. I'll post this info in the Slickpet translation thread.
Woof is due today or tomorrow. I'll be very busy with Puppy until Friday, maybe Saturday, then I'm out of town (work) for at least 8 days. I might borrow a laptop for this time and get a new 3G modem, (mine is non-working after 4 years ).
Cheers
I appreciate your lib hunting, however at this late stage I am not changing anything, unless it's a bug.
I have severe unexpected time constraints approaching and I can't spend time on recompiling mplayer, gnome-mplayer and such.
Hopefully a future release can exclude mplayer and offer a full featured version in the repo. At the moment though there is no other program small enough to play DVDs, maybe ffplay will get that capability. Actually, you can play a dvd in ffplay but it's tricky.
BTW, pburn-3.4.1 seems fine to me, no X crashes yet, and IIRC Jim1911 reports success copying a DVD, he didn't mention though if he shrank it.
-
Stripe and DaveS, I reported the lack of unsquashing to Barry, I'm positive it's woof, however I can fix it if it's not. A bit later, not at my machine ATM.
-
Playdayz, thanks for tor package and testing radeon in 5++. I'll package latest JWM soon to see if that is any remedy for FS issues.
-
Indian - sorry mate, haven't got a driver for you yet, stay tuned, I'll PM you when I have one.
-
Charlie, I haven't studied your siliconmotion issue yet, will do today, fix will likely be included.
-
Transmission will likely be dumped from Slickpet in favour of TOR, this has been my idea for awhile and there is a comment in the Slickpet en_US lang file to translate this, LOC_TOR. The transmission on the iso is a tiny older version, it works ok, the one in Slickpet (to be PPM) requires libevent. I'll post this info in the Slickpet translation thread.
Woof is due today or tomorrow. I'll be very busy with Puppy until Friday, maybe Saturday, then I'm out of town (work) for at least 8 days. I might borrow a laptop for this time and get a new 3G modem, (mine is non-working after 4 years ).
Cheers
Puppy Linux Blog - contact me for access
had gnome-mplayer paused for ~30-40-min then crashed needing to restart with xwin. noted seg fault report attached.
- Attachments
-
- dmesg.txt.gz
- (44.96 KiB) Downloaded 216 times
http://distro.ibiblio.org/quirky/pet_pa ... -xz-w5.pet
That's the fix for squash.. (appears to be my bad )
[however.. ]
For woofers..
One thing.. it looks like my bad, however there is a potential woof conflict.. the "name only" fields in Packages-puppy-common official are identical for mksquash4 and mksquash4.2.
{why do we always get back to 42 ?? }
Cheers
That's the fix for squash.. (appears to be my bad )
[however.. ]
For woofers..
One thing.. it looks like my bad, however there is a potential woof conflict.. the "name only" fields in Packages-puppy-common official are identical for mksquash4 and mksquash4.2.
There is another identically sized package at ibiblio called "squashfs-tools42-4.2-gzip-xz-w5.pet", whose database entry would be unique... [field 2] squashfs-tools42.squashfs-tools-3.3|squashfs-tools|3.3||BuildingBlock|148K||squashfs-tools-3.3.pet||A compressed read-only filesystem for Linux, for squashfs 3.x filesystems|puppy|4||
squashfs-tools4-4.0-pup4|squashfs-tools4|4.0-pup4||BuildingBlock|176K||squashfs-tools4-4.0-pup4.pet||squashfs utilities|puppy|4||
squashfs-tools4-4.2-gzip-xz-w5|squashfs-tools4|4.2-gzip-xz-w5||BuildingBlock|200K||squashfs-tools4-4.2-gzip-xz-w5.pet|+linux_kernel&ge2.6.39|squashfs utilities, with gzip and xz compression support, use with kernel 2.6.39 or later and with xz support|puppy|wary5||
{why do we always get back to 42 ?? }
Cheers
Puppy Linux Blog - contact me for access
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
42
-
In other unrelated news...
jim3630.. looks like jwm segfaulted for you bringing down X, (as it will).
Attached is the latest jwm-508 revision from Joe.. (PS, I need to tell him that Slacko runs on Macs )
-
In other unrelated news...
jim3630.. looks like jwm segfaulted for you bringing down X, (as it will).
Attached is the latest jwm-508 revision from Joe.. (PS, I need to tell him that Slacko runs on Macs )
- Attachments
-
- jwm-508-s-i486.pet
- (144.49 KiB) Downloaded 264 times
Puppy Linux Blog - contact me for access
Yes jim3630, that is a bug and I can't figure it out. It doesn't happen with the exact same pets in Lucid, and it does happen even with older versions of tor in slacko.clicking to full screen would open to full display then clicking a link it appeared to stall. clicking to change full view to partial revealed the destination page.
tor's version of ff is only that OOB saving cookies is disabled otherwise it's the same iirc.
The FF 7.0.1 in Tor is also configured for vidalia--in my experience it is a pain to configure vidalia and so I think the tor-browser bundle is a good thing for most users--if we can figure out the full screen business. I'll try the jwm 01micko just posted, maybe....
playdayz.. you can get openbox/fbpanel fully configured for slacko from PPM, thanks to DaveS (one minor issue, top margin is setup for taskbar at top, will fix and reupload soon)
Just click fbpanel (desktop menu) in PPM and open box gets dragged in.
Maybe that's a fix for TOR?
Just click fbpanel (desktop menu) in PPM and open box gets dragged in.
Maybe that's a fix for TOR?
Puppy Linux Blog - contact me for access
Indian..
I can't find a driver for you but there could be something else.
One thing to try is this:
If using cd to boot type puppy vga=normal pfix=ram then see if you get a decent resolution. (it looks like a kernel issue.. maybe you want o try B5++?, has a later kernel, but it may not be good on older HW)
If using grub, syslinux or extlinux to boot put "vga=normal" on the kernel line.
Also, can you provide the Xorg.0.log file please?
makes Xorg.0.log.gz ready to post to forum
I can't find a driver for you but there could be something else.
One thing to try is this:
If using cd to boot type puppy vga=normal pfix=ram then see if you get a decent resolution. (it looks like a kernel issue.. maybe you want o try B5++?, has a later kernel, but it may not be good on older HW)
If using grub, syslinux or extlinux to boot put "vga=normal" on the kernel line.
Also, can you provide the Xorg.0.log file please?
Code: Select all
cp -af /var/log/Xorg.0.log ./
gzip Xorg.0.log
Puppy Linux Blog - contact me for access
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
JWM/FF-7.0.1 F11 bug vapourised ... / MHHP01micko wrote:Attached is the latest jwm-508 revision from Joe..
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
- MinHundHettePerro
- Posts: 852
- Joined: Thu 05 Feb 2009, 22:22
- Location: SE
Yeah, right! Although SL is nice, back to the roots (yeah, root, pun intended) ...01micko wrote:Hmm.... something has changed.. but what?
[ ]
Cheers / MHHP
[color=green]Celeron 2.8 GHz, 1 GB, i82845, many ptns, modes 12, 13
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]
Dual Xeon 3.2 GHz, 1 GB, nvidia quadro nvs 285[/color]
Slackos & 214X, ... and Q6xx
[color=darkred]Nämen, vaf....[/color] [color=green]ln -s /dev/null MHHP[/color]