Saluki
Re: Open with
This may or may not be the cause, but it's worth a try. I couldn't duplicate the behavior, but I've heard from others that could. Saluki has a bug in the uca.xml file. It's located at two different locations - a hidden file at /root/.config/Thunar, and another at /etc/xdg/Thunar. Download the attached gz file. Right-click and gunzip the file, and then copy and place it in the two directories. There may be another of the same name in /root - this may be deleted as it's not needed and is just taking up space. Let me know if this helps...I'm just as interested as you are in finding the solution.rg66 wrote:I've just noticed that on my custom built Saluki 023 when I use the "open with" from the right click menu all the apps are listed randomly when they used to be alphabetical before the build. Any way to change this back?
- Attachments
-
- uca.xml.gz
- (1.07 KiB) Downloaded 568 times
nice shot , after i check that option and reboot, everything goes smoothly, enjoy it!starhawk wrote:This might help.
On most puppies (I don't have saluki open in front of me, sorry) there is a "personalize settings" wizard, also called "firstrun wizard" or "firstboot wizard".
Open that. It will display the "welcome to [insert Puppy name here]" box and then give you a bunch of different useful options. One is a checkbox to enable UTF-8. Check the box and click the OK button. It will make you restart X after a minute or two (restarting X closes your active programs but it will not unmount anything).
After that you should be good to go.
thank you
michael
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Thanks Elroy but it didn't work. I did find those files yesterday when I was digging through the a_drive to try and find the problem but they seem to only apply to pfind down in the context menu and there was nothing about arrangment order.
If I boot without the a_drive the list is alphabetical, I then loaded the a_drive and the list stayed that way with all my added apps listed. It seems there is another file in the a_drive that is overriding the one from the puppy sfs. I still consider myself to be a linux noob so am just guessing.
Anyway, thanks for still supporting Saluki even though you are very busy with Carolina. I love Saluki but will probably switch to that when it matures a bit.
If I boot without the a_drive the list is alphabetical, I then loaded the a_drive and the list stayed that way with all my added apps listed. It seems there is another file in the a_drive that is overriding the one from the puppy sfs. I still consider myself to be a linux noob so am just guessing.
Anyway, thanks for still supporting Saluki even though you are very busy with Carolina. I love Saluki but will probably switch to that when it matures a bit.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Big Thanks to JohnMurga
The foregoing discussion of spam problems on the Saluki-Forum should remind us of how much a debt of gratitude we owe to JohnMurga and our moderators for keeping this Forum spam-free.
We probably take it for granted: like fresh air until you've had to live in a smog-bound or polluted city.
Thanks, John.
mikesLr
We probably take it for granted: like fresh air until you've had to live in a smog-bound or polluted city.
Thanks, John.
mikesLr
-
- Posts: 597
- Joined: Thu 13 Nov 2008, 13:45
Actually, I did find a USB stick I could reformat and lay out a new table on. I think I just erased the screenshot with the script I ran, but anyways, this is what it was like:
It was like the one which didn't work, didn't have the hidden sectors, but it did have the media descriptor. I have no idea what I did to the first one to wipe the media descriptor.
However, it worked fine and had no problems unmounting it in Saluki. Strangely enough, it didn't show a special name like the other two when mounted.
It was like the one which didn't work, didn't have the hidden sectors, but it did have the media descriptor. I have no idea what I did to the first one to wipe the media descriptor.
However, it worked fine and had no problems unmounting it in Saluki. Strangely enough, it didn't show a special name like the other two when mounted.
"The foregoing discussion of spam problems on the Saluki-Forum
should remind us of how much a debt of gratitude we owe to JohnMurga
and our moderators for keeping this Forum spam-free. "
And what about >. Makoto
Day in day out....he's on the case
Should be given mod privileges in >> SPAM REPORTS
Chris.
should remind us of how much a debt of gratitude we owe to JohnMurga
and our moderators for keeping this Forum spam-free. "
And what about >. Makoto
Day in day out....he's on the case
Should be given mod privileges in >> SPAM REPORTS
Chris.
-
- Posts: 4
- Joined: Fri 14 Sep 2012, 20:15
Sayonara Player
Hey!
I managed to decrease the memory consumption to about 45 MB and increase performance.
Additionally audio tracks and metadata now can be loaded via command line. You can give sayonara a single or multiple files as command line arguments. But be aware of spaces in the filenames. You can use quotation marks around each argument.
The new version is in the svn repository now.
Just check out
http://sayonara-player.googlecode.com/svn/trunk/
Lucio
I managed to decrease the memory consumption to about 45 MB and increase performance.
Additionally audio tracks and metadata now can be loaded via command line. You can give sayonara a single or multiple files as command line arguments. But be aware of spaces in the filenames. You can use quotation marks around each argument.
The new version is in the svn repository now.
Just check out
http://sayonara-player.googlecode.com/svn/trunk/
Lucio
Re: Sayonara Player
Lucio,LucioCarreras wrote:Hey!
I managed to decrease the memory consumption to about 45 MB and increase performance.
Additionally audio tracks and metadata now can be loaded via command line. You can give sayonara a single or multiple files as command line arguments. But be aware of spaces in the filenames. You can use quotation marks around each argument.
The new version is in the svn repository now.
Just check out
http://sayonara-player.googlecode.com/svn/trunk/
Lucio
Nice job, working ok now, though there are a few things that could be done.
1) any chance of adding *.oga they will play if their renamed *.ogg,
2) the mute icon for the dark theme is missing, I made a copy of vol_mute.png and renamed it vol_mute_dark.png, that fixed it.
3) shown in the image, the version still say's 0.2
other than that it works well.
I've added sayonara-0.3.pet to the repo, refresh Saluki in the PPM
- Attachments
-
- sayonara-0.3.jpg
- (28.65 KiB) Downloaded 1761 times
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]
Network Browse from Thunar
I'm using Saluki 023 and noticed that browsing samba shares from Thunar doesn't appear to work. Still have to use pnethood or something similar (I was using smbnetfs). I've petted up some files from the Lucid gvfs-backends.deb and pulled a few libs out of Gray's SalukiNOP and managed to get it to work. Just install the pet, and restart X. You should then be able to browse your samba shares from your other computers on your network, using Thunar's integrated network icon.
- Attachments
-
- networkbrowse.png
- (43.78 KiB) Downloaded 1536 times
Re: Network Browse from Thunar
stifiling wrote:I'm using Saluki 023 and noticed that browsing samba shares from Thunar doesn't appear to work. Still have to use pnethood or something similar (I was using smbnetfs). I've petted up some files from the Lucid gvfs-backends.deb and pulled a few libs out of Gray's SalukiNOP and managed to get it to work. Just install the pet, and restart X. You should then be able to browse your samba shares from your other computers on your network, using Thunar's integrated network icon.
Can you auto mount these shares on reboot ?
regards Einar
i mean like in windows we have "map network drive" it then gets a permanent letter. So that i can auto mount a share that i use in XBMC. or do I have to click on it to activate the share ?stifiling wrote:if by 'auto-mount' you mean....still working after reboot? then the answer is yes.
it should work the same way it does in nautilus...or on windows. your network shares should be visible in Thunar....even after a reboot.
ok i see how you mean now. you could write a script and put in in your /root/Startup folder similar to this to mount your share:
#!/bin/sh
sleep 10
mount -t cifs //192.168.2.101/share /mnt/network -o username=root
that way after a reboot, your share will always be mounted in /mnt/network.
you could also try a script like this:
#!/bin/sh
sleep 10
smbnetfs /mnt/network
the 'sleep 10' means wait 10 seconds and it's there to give your internet a chance to fully connect before it tries to mount your shares. you may or may not want to increase that.
u'd have to untar and copy the attached file first to /usr/bin if you want to try smbnetfs
smbnetfs should automatically find all your shares on your network, rather than mounting a specific share, which is what the first suggestion does.
these are my preferred ways of accomplishing this.
#!/bin/sh
sleep 10
mount -t cifs //192.168.2.101/share /mnt/network -o username=root
that way after a reboot, your share will always be mounted in /mnt/network.
you could also try a script like this:
#!/bin/sh
sleep 10
smbnetfs /mnt/network
the 'sleep 10' means wait 10 seconds and it's there to give your internet a chance to fully connect before it tries to mount your shares. you may or may not want to increase that.
u'd have to untar and copy the attached file first to /usr/bin if you want to try smbnetfs
smbnetfs should automatically find all your shares on your network, rather than mounting a specific share, which is what the first suggestion does.
these are my preferred ways of accomplishing this.
- Attachments
-
- smbnetfs.tar.gz
- (39.16 KiB) Downloaded 620 times
stifiling wrote:ok i see how you mean now. you could write a script and put in in your /root/Startup folder similar to this to mount your share:
#!/bin/sh
sleep 10
mount -t cifs //192.168.2.101/share /mnt/network -o username=root
that way after a reboot, your share will always be mounted in /mnt/network.
you could also try a script like this:
#!/bin/sh
sleep 10
smbnetfs /mnt/network
the 'sleep 10' means wait 10 seconds and it's there to give your internet a chance to fully connect before it tries to mount your shares. you may or may not want to increase that.
u'd have to untar and copy the attached file first to /usr/bin if you want to try smbnetfs
smbnetfs should automatically find all your shares on your network, rather than mounting a specific share, which is what the first suggestion does.
these are my preferred ways of accomplishing this.
Nice , will try this out. thanks a alot
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Re: Network Browse from Thunar
Nice one, about time someone got this working. Thanks!stifiling wrote:I'm using Saluki 023 and noticed that browsing samba shares from Thunar doesn't appear to work. Still have to use pnethood or something similar (I was using smbnetfs). I've petted up some files from the Lucid gvfs-backends.deb and pulled a few libs out of Gray's SalukiNOP and managed to get it to work. Just install the pet, and restart X. You should then be able to browse your samba shares from your other computers on your network, using Thunar's integrated network icon.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Re: Network Browse from Thunar
thanks for the "thanks". but yea, i think it should be added to the repo. better yet, it 'should' be woofed into the next release.rg66 wrote:Nice one, about time someone got this working. Thanks!stifiling wrote:I'm using Saluki 023 and noticed that browsing samba shares from Thunar doesn't appear to work. Still have to use pnethood or something similar (I was using smbnetfs). I've petted up some files from the Lucid gvfs-backends.deb and pulled a few libs out of Gray's SalukiNOP and managed to get it to work. Just install the pet, and restart X. You should then be able to browse your samba shares from your other computers on your network, using Thunar's integrated network icon.
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
@ Stifiling, It's still better than Pnethood but find I keep getting asked for a password over and over. Anyway to get it to save passwords at least for that session? Also, If I go back a directory it sometimes shows a blank folder.
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
hmm...i'm poking around with it now. i hadn't even thought about testing with passwords...due to the fact that i don't use them. totally slipped my mind. but now that i've set one on one of my machines....i'm not getting a password prompt.rg66 wrote:@ Stifiling, It's still better than Pnethood but find I keep getting asked for a password over and over. Anyway to get it to save passwords at least for that session? Also, If I go back a directory it sometimes shows a blank folder.
your Thunar on Saluki is popping up a password prompt box??
I'll try to identify where the problem is.
as far as the folders being empty though...that appears to happen only after restarting samba...or towards the beginning of a new samba connection. after the connection is made (about 30 seconds or so after restarting samba) it's been solid on my machines so far. So far, at least for me...the behavior has been the same as if i was using XFCE in Arch Linux. but once again, i wasn't using passwords on any of my machines on my network then.
edit:
ok i got the password prompt and....i'm not experiencing the same issue you are. after entering the username and password for the share, the password is saved for the session for me. only way to get the password prompt to pop back up is by restarting X.