Unable to set time/clock (Solved)
Unable to set time/clock (Solved)
In Puppy 1.03 my clock is 1 hour slow. I have tried to change time zones but it does not make any changes to the time no matter what zone I select.
And Xclock just seems to be an anolog type display which is also 1 hour slow.
Is there a way to correct this?
And Xclock just seems to be an anolog type display which is also 1 hour slow.
Is there a way to correct this?
www.gnu.org
www.PCCleanUp.US
www.PCCleanUp.US
The standard linux way of changing the date is through the console.
Open a command console (rxvt) and type the following command
Alternatively you could install an application to keep your time syncronized. I am sure that I saw that someone posted a DotPup for such application. I will have a look.
Open a command console (rxvt) and type the following command
Code: Select all
date MMDDhhmmYYYY.s
# for example to set the time to 8:15:20 PM on July 20, 2005 type the command as follows
date 072020152005.20
Well rarsa.
I tried to use the clock from net program and it gave the same thing the other did. 1 hour behind.
I looked over your instructions and it took a min for me to figure out what you were saying with the time and date and all but once I figured it out. I changed the time so that it is correct with out problems. Thank you for your help.
I tried to use the clock from net program and it gave the same thing the other did. 1 hour behind.
I looked over your instructions and it took a min for me to figure out what you were saying with the time and date and all but once I figured it out. I changed the time so that it is correct with out problems. Thank you for your help.
www.gnu.org
www.PCCleanUp.US
www.PCCleanUp.US
Actually after I suggested looking at the 'internet time' DotPup I tried it myself.
Apparently it requires that the system date is UTF. My system clock has the local time (GMT -5) so when I set the time with the Internet time utility it set it 5 hours slow.
Oh, another thing for GuestToo: The 'Internet time' utility shows that you should set your timezone first, and it gives as an example New York +5, actually New York is -5 meaning that when it is 7 GMT it is 2 EST.
Apparently it requires that the system date is UTF. My system clock has the local time (GMT -5) so when I set the time with the Internet time utility it set it 5 hours slow.
Oh, another thing for GuestToo: The 'Internet time' utility shows that you should set your timezone first, and it gives as an example New York +5, actually New York is -5 meaning that when it is 7 GMT it is 2 EST.
my /etc/TZ is EST5EDT
which means Eastern Standard Time (offset = +5) and automatically use Eastern DaylightSavings Time
as far as i know, the offset for EST is +5 ... not -5
and: http://www.die.net/doc/linux/man/man3/tzset.3.html
which means Eastern Standard Time (offset = +5) and automatically use Eastern DaylightSavings Time
as far as i know, the offset for EST is +5 ... not -5
see: http://www.die.net/doc/linux/man/man8/hwclock.8.htmlThe offset string immediately follows std and specifies the time value to be added to the local time to get Coordinated Universal Time (UTC). The offset is positive if the local time zone is west of the Prime Meridian and negative if it is east.
and: http://www.die.net/doc/linux/man/man3/tzset.3.html
http://en.wikipedia.org/wiki/UTC
http://en.wikipedia.org/wiki/Universal_Time
http://en.wikipedia.org/wiki/Universal_Time
"UTC" is not a true abbreviation; it is a variant of Universal Time, abbreviated UT, and has a modifier C (for "coordinated") appended to it just like other variants of UT
Universal Time (UT) is a timescale based on the rotation of the Earth.
Well, those utilities have it backwards as it is normally accepted in timezone maps (and Other linux tools and other OS's tools)
http://www.worldtimezone.com/
http://aa.usno.navy.mil/faq/docs/us_tzones.html
It is normally accepted that -5 is EST.
http://www.worldtimezone.com/
http://aa.usno.navy.mil/faq/docs/us_tzones.html
It is normally accepted that -5 is EST.
I had no luck at all setting the time until I went to the bios and first set the correct time there. The problem is that this bios does not support time zones so when ever I set the system time from the internet it sets to utc in the bios. I really should update my bios but I don't trust my floppy drive or my cdrom.
I named it well-enough and left it alone.
I named it well-enough and left it alone.
Puppy Linux...
It just works!
It just works!
I do not have a set date time in my control panel.Ian wrote:Did you try using the Set time/date in Control panel after you set the timezone.
There is a set time zone.
Or Xclock.
Neither of which correct the problem.
The other thing is that the command line solution only stays correct as long as I do not restart the PC. If I do it goes back to the online sync time which is several (5 or 6) hours earlier than my time.
Now I just booted back in to Puppy from the other OS and the time is correct in it.
Wonder what happened there? Cause it was WAY OFF this morning.
Dorothy and Toto must have stopped by and fixed the problem.
www.gnu.org
www.PCCleanUp.US
www.PCCleanUp.US