alphaOS [closed]
Peasyscan
i did not try because in the past it was IMPOSSIBLE to get my wifi scan works on aaaaall the puppies.
and I launch Peasyscan, and...success !
That's very very unexpected and so much amazing !
incredible.
A question, now, there is a cpu temp° in the system tools, and it works great too !
is it possible to get in in conky or tint2 ?
Many Thanks rcrsn51, simargl and other contributors..
(sorry for my English, I try to do better but..it's very hard).
Scooby, I'm also using the flsynclient from Carolina to configure touchpads in alphaOS 4.0 sucessfully. Adding a synclient -s line to /root/.start will load the settings created on a reboot or X restart.Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
So you dont have to hack in xorg.conf at all?Marv wrote:Scooby, I'm also using the flsynclient from Carolina to configure touchpads in alphaOS 4.0 sucessfully. Adding a synclient -s line to /root/.start will load the settings created on a reboot or X restart.Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
Some xorg.conf substitution/modification is still required to get the synaptics driver loaded and running. Two straight substitutions that have worked are the one I mentioned on the alphaOS board for the ALPS touchpads and the one from Carolina you used. Once the driver is running, synclient can be run in a terminal to change configuration, xorg.conf can be edited manually, or flsynclient can be installed and used to configure the touchpad from a GUI. If that is done, it creates a configuration file .flsynclient in /root which can be manually edited and loaded at boot using a line synclient -s in /root/.start. As I recall, flsynclient is around 200kb. Whether the convenience is worth the weight is a judgement call.Scooby wrote:So you dont have to hack in xorg.conf at all?Marv wrote:Scooby, I'm also using the flsynclient from Carolina to configure touchpads in alphaOS 4.0 sucessfully. Adding a synclient -s line to /root/.start will load the settings created on a reboot or X restart.Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
a video conversion software
Hello,
is it possible to have a video conversion software ?
For example VLC ?
Thanks you
NB : can't have the cpu temperature monitor on my conky...never mind
is it possible to have a video conversion software ?
For example VLC ?
Thanks you
NB : can't have the cpu temperature monitor on my conky...never mind
- DM was on fire!
- Posts: 159
- Joined: Sat 12 Sep 2009, 15:47
- Location: N.E. Georgia Mountains, USA
printing tes
I have been testing two T20E and TX111 epson printer, and it works as perfectly.
i have re-compile ffmpeg and it dependence, and mplayer2, here the result:
mplayer and ffplay test to play the wma file.
mplayer and ffplay played downloaded youtube video.
i have re-compile ffmpeg and it dependence, and mplayer2, here the result:
mplayer and ffplay test to play the wma file.
Code: Select all
[root@alphaos ~]# mplayer /mnt/sda2/musik/LAGU/Barat/Male/311/311\ -\ Amber.wma
MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
Playing /mnt/sda2/musik/LAGU/Barat/Male/311/311 - Amber.wma.
Detected file format: asf (libavformat)
[lavf] stream 0: audio (wmav2), -aid 0, -alang eng
Clip info:
WM/ToolName: Cool Edit Pro
WM/ToolVersion: 2.01.3097.0
WMFSDKVersion: 10.00.00.3802
WMFSDKNeeded: 0.0.0.0000
IsVBR: 0
DeviceConformanceTemplate: L1
WM/WMADRCPeakReference: 32767
WM/WMADRCAverageReference: 9125
Load subtitles in /mnt/sda2/musik/LAGU/Barat/Male/311/
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
ad_ffmpeg: initial decode failed
ADecoder init failed :(
Could not open audio decoder ffmpeg.
Opening audio decoder: [dmo] Win32/DMO decoders
Win32 LoadLibrary failed to load: /usr/lib/codecs/wmadmod.dll
IMediaObject ERROR: 0x82a9a80 could not open DMO DLL (0x0 : 0)
ERROR: Could not open required DirectShow codec wmadmod.dll.
ADecoder preinit failed :(
Could not open audio decoder dmo.
Opening audio decoder: [acm] Win32/ACM decoders
Loading codec DLL: 'divxa32.acm'
Win32 LoadLibrary failed to load: /usr/lib/codecs/divxa32.acm
Can't open library divxa32.acm
ACM_Decoder: Unappropriate audio format
Could not load/initialize Win32/ACM audio codec (missing DLL file?).
ADecoder preinit failed :(
Could not open audio decoder acm.
Cannot find codec for audio format 0x161.
Audio: no sound
Video: no video
Exiting... (End of file)
[root@alphaos ~]# ffplay /mnt/sda2/musik/LAGU/Barat/Male/311/311\ -\ Amber.wma
ffplay version 1.2 Copyright (c) 2003-2013 the FFmpeg developers
built on Apr 4 2013 10:35:33 with gcc 4.7.2 (alphaOS)
configuration: --prefix=/usr --mandir=/usr/share/man --enable-vaapi --enable-gpl --enable-version3 --enable-avfilter --enable-nonfree --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-shared --enable-pthreads --enable-postproc --enable-x11grab --enable-small --disable-debug --disable-static --disable-doc --disable-htmlpages --disable-manpages
libavutil 52. 18.100 / 52. 18.100
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.104 / 54. 63.104
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 42.103 / 3. 42.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
Input #0, asf, from '/mnt/sda2/musik/LAGU/Barat/Male/311/311 - Amber.wma':
Metadata:
WM/ToolName : Cool Edit Pro
WM/ToolVersion : 2.01.3097.0
WMFSDKVersion : 10.00.00.3802
WMFSDKNeeded : 0.0.0.0000
IsVBR : 0
DeviceConformanceTemplate: L1
WM/WMADRCPeakReference: 32767
WM/WMADRCAverageReference: 9125
Duration: 00:03:30.60, start: 0.000000, bitrate: 80 kb/s
Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, 2 channels, fltp, 80 kb/s
17.55 A-V: 0.000 fd= 0 aq= 22KB vq= 0KB sq= 0B f=0/0
[root@alphaos ~]#
Code: Select all
[root@alphaos ~]# mplayer /mnt/sdc1/Armored_Core_V_E3_2011_Trailer__HD.flv
MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
Playing /mnt/sdc1/Armored_Core_V_E3_2011_Trailer__HD.flv.
Detected file format: flv (libavformat)
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0
VIDEO: [H264] 640x360 0bpp 29.970 fps 539.9 kbps (65.9 kbyte/s)
Clip info:
starttime: 0
totalduration: 185
totaldatarate: 658
bytelength: 15222056
canseekontime: true
sourcedata: BD075EE04HH1309077902123825
purl:
pmsg:
Load subtitles in /mnt/sdc1/
[ass] auto-open
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Asking decoder to use 2 threads if supported.
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
Too many video packets in the buffer: (4096 in 8796863 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
Too many video packets in the buffer: (4096 in 8796863 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
Too many video packets in the buffer: (4096 in 8796863 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
Too many video packets in the buffer: (4096 in 8796863 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
Too many video packets in the buffer: (4096 in 8796863 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
ad_ffmpeg: initial decode failed
ADecoder init failed :(
Could not open audio decoder ffmpeg.
Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
AUDIO: 44100 Hz, 2 ch, s16le, 125.1 kbit/8.87% (ratio: 15641->176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Movie-Aspect is undefined - no prescaling applied.
VO: [xv] 640x360 => 640x360 Planar YV12
A: 136.4 V: 85.3 A-V: 51.096 ct: 0.000 0/ 0 2% 2% 0.0% 0 0
[Mixer] No hardware mixing, inserting volume filter.
A: 185.0 V: 185.0 A-V: -0.022 ct: -0.000 0/ 0 2% 2% 0.4% 0 0
Exiting... (End of file)
[root@alphaos ~]# ffplay /mnt/sdc1/Armored_Core_V_E3_2011_Trailer__HD.flv
ffplay
[root@alphaos ~]# ffplay /mnt/sdc1/Armored_Core_V_E3_2011_Trailer__HD.flv
ffplay version 1.2 Copyright (c) 2003-2013 the FFmpeg developers
built on Apr 4 2013 10:35:33 with gcc 4.7.2 (alphaOS)
configuration: --prefix=/usr --mandir=/usr/share/man --enable-vaapi --enable-gpl --enable-version3 --enable-avfilter --enable-nonfree --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libmp3lame --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-shared --enable-pthreads --enable-postproc --enable-x11grab --enable-small --disable-debug --disable-static --disable-doc --disable-htmlpages --disable-manpages
libavutil 52. 18.100 / 52. 18.100
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.104 / 54. 63.104
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 42.103 / 3. 42.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
Input #0, flv, from '/mnt/sdc1/Armored_Core_V_E3_2011_Trailer__HD.flv':
Metadata:
starttime : 0
totalduration : 185
totaldatarate : 658
bytelength : 15222056
canseekontime : true
sourcedata : BD075EE04HH1309077902123825
purl :
pmsg :
Duration: 00:03:05.01, start: 0.000000, bitrate: 658 kb/s
Stream #0:0: Video: h264, yuv420p, 640x360, 539 kb/s, 29.97 tbr, 1k tbn, 59.94 tbc
Stream #0:1: Audio: aac, 44100 Hz, stereo, fltp, 125 kb/s
48.38 A-V: 0.011 fd= 0 aq= 6KB vq= 10KB sq= 0B f=0/0
[root@alphaos ~]#
Changes in spkg_gui
- new column showing packages "Version"
- new button Home - it opens package home page inside firefox, so you can get better info before installing the program
New packages added to repo:
- libreoffice - it is divided to 3 packages (libreoffice-4.0.2-1.spkg, libo1_core-4.0.2-1.spkg, libo2_core-4.0.2-1.spkg ),
because I got error (502) when uploading single 130MB package.
If you want to save space inside savefile type: makesfs libreoffice (wait and relax)
- two new games:
assault cube 50MB http://assault.cubers.net/
trigger rally 30MB http://sourceforge.net/projects/trigger-rally/
- new column showing packages "Version"
- new button Home - it opens package home page inside firefox, so you can get better info before installing the program
New packages added to repo:
- libreoffice - it is divided to 3 packages (libreoffice-4.0.2-1.spkg, libo1_core-4.0.2-1.spkg, libo2_core-4.0.2-1.spkg ),
because I got error (502) when uploading single 130MB package.
If you want to save space inside savefile type: makesfs libreoffice (wait and relax)
- two new games:
assault cube 50MB http://assault.cubers.net/
trigger rally 30MB http://sourceforge.net/projects/trigger-rally/
Re: a video conversion software
I didn't know VLC is also media conversion program, Arefacti maybe you could try to compile it:Arefacti wrote:Hello,
is it possible to have a video conversion software ?
For example VLC ?
Thanks you
NB : can't have the cpu temperature monitor on my conky...never mind
install qt4 from alphaos repository then type spkg -a vlc, check options there and after that type spkg -ci vlc.
also don't forget to add "enable run as root" , my goal is make new tool - not compile 5000 packages all by myself that's impossible
Cheers
wireless drivers package in alphaos is from puppy precise, if Puppy precise works this should also work.. i suggest test a bit more and with lsmod compare loaded driversDM was on fire! wrote:Hi,
I absolutely LOVE this Pup. I've been looking for something like this for quite some time...however, it refuses to recognize my wireless card (p54usb) that Puppy has recognized for quite some time.
Are there any extra packages I've missed with wireless drivers?
DM
Regards
I removed all locale files except English, will leave them in for next chrome update.Arefacti wrote:here I am, the "stupid questions man" Arefacti
I don't know to have Chrome in other language, you know ?
thanks if you want help me
So with ffplay you could play wma, and I don't have ffplay binary at all I see you added --enable-nonfree but with that we'd break some law I thinkndrancs wrote:I have been testing two T20E and TX111 epson printer, and it works as perfectly.
i have re-compile ffmpeg and it dependence, and mplayer2, here the result:
mplayer and ffplay test to play the wma file.
Re: a video conversion software
That's right, I understand.simargl wrote:I didn't know VLC is also media conversion program, Arefacti maybe you could try to compile it:Arefacti wrote:Hello,
is it possible to have a video conversion software ?
For example VLC ?
Thanks you
NB : can't have the cpu temperature monitor on my conky...never mind
install qt4 from alphaos repository then type spkg -a vlc, check options there and after that type spkg -ci vlc.
also don't forget to add "enable run as root" , my goal is make new tool - not compile 5000 packages all by myself that's impossible
Cheers
I'll try !
thanks
- DM was on fire!
- Posts: 159
- Joined: Sat 12 Sep 2009, 15:47
- Location: N.E. Georgia Mountains, USA
Thanks for the swift reply. I've been using Puppy since Puppy 4 and this card has workd with every version I've used. I run Lucid right now.simargl wrote:wireless drivers package in alphaos is from puppy precise, if Puppy precise works this should also work.. i suggest test a bit more and with lsmod compare loaded driversDM was on fire! wrote:Hi,
I absolutely LOVE this Pup. I've been looking for something like this for quite some time...however, it refuses to recognize my wireless card (p54usb) that Puppy has recognized for quite some time.
Are there any extra packages I've missed with wireless drivers?
DM
Regards
I'll give Precise a shot and come back with info. Thanks.
- DM was on fire!
- Posts: 159
- Joined: Sat 12 Sep 2009, 15:47
- Location: N.E. Georgia Mountains, USA
Network printing works
Hi all, especially rcrsn51 and simargl,
Happy to report that printing works in alphaOS after installing rcrsn51's printing package and then using ppet to install printer drivers for my Canon MP640 all-in-one printer. Peasyscan also works over the network. For the records, I downloaded canon_mp640-3.20.pet and cups-bjnp-1.0.pet from:
http://murga-linux.com/puppy/viewtopic. ... 110#644110
Thanks guys.
My next wish is to see openshot in the alphaOS package manager
Cheers.
Happy to report that printing works in alphaOS after installing rcrsn51's printing package and then using ppet to install printer drivers for my Canon MP640 all-in-one printer. Peasyscan also works over the network. For the records, I downloaded canon_mp640-3.20.pet and cups-bjnp-1.0.pet from:
http://murga-linux.com/puppy/viewtopic. ... 110#644110
Thanks guys.
My next wish is to see openshot in the alphaOS package manager
Cheers.
[b][color=green]Success is never ending. ... Failure is never final![/color][/b]
[size=75][i](Used with kind permission from jejy69)[/i][/size]
[size=75][i](Used with kind permission from jejy69)[/i][/size]
radeon video fail
Hmmm, posted this a couple of days ago - but where did that post go? Grits teeth and tries again. I have run this iso (alphaos4) on a couple of laptops with radeon video. In both cases the system booted but was unusable as X was a mess of blobs. Wouldn't switch to a console, and I didn't see a point during boot where a kernel parameter could be added. I guess this is a 'no modeset' situation. The only way out was to power cycle. Compaq V2000 with Radeon XPress and a ThinkPad R40 with Radeon Mobility. Any suggestions about this? AlphaOS would likely go well on these machines, but sadly this problem means I may never know.
- DM was on fire!
- Posts: 159
- Joined: Sat 12 Sep 2009, 15:47
- Location: N.E. Georgia Mountains, USA
Uninstalling isn't a big matter. Just remove the savefile and a fresh install.ndrancs wrote:try this manual method:DM was on fire! wrote:I found a .pet of the p54usb driver. Theoretically could I just install it?
converting .pet package with pet2tgz in lucid,
run this in alphaos
tar xvf pet-name.tar.gz -C /
but with this method, you cant do uninstall the pet.
I hope this helps.
I'll give this a try later. Thank you.
I did notice the driver was for an older kernel though. So don't know how that will manage.
I think you maybe need some firmware file from that package, because kernel module is already installedDM was on fire! wrote:Uninstalling isn't a big matter. Just remove the savefile and a fresh install.
I'll give this a try later. Thank you.
I did notice the driver was for an older kernel though. So don't know how that will manage.
Code: Select all
[root@alphaos ~]# modinfo p54usb
filename: /lib/modules/3.8.2/kernel/drivers/net/wireless/p54/p54usb.ko
firmware: isl3887usb
firmware: isl3886usb
alias: prism54usb
license: GPL
description: Prism54 USB wireless driver
author: Michael Wu <flamingice@sourmilk.net>
alias: usb:v413Cp8104d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v413Cp8102d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v413Cp5513d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3705d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3704d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1740p1000d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1668p1050d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1435p0427d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1413p5400d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13B1p000Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v13B1p000Ad*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1260pEE22d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v124Ap4025d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0D8Ep3762d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CDEp0015d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CDEp0008d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BF8p1009d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BAFp0118d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0915p2002d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0915p2000d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p4240d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083ApF503d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083ApC501d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083Ap4531d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083Ap4521d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0803p4310d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0707pEE13d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v06B9p0121d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v06A9p000Ed*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0572p2002d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0572p2000d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v050Dp7050d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0471p1230d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v5041p2235d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v5041p2234d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3762d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3703d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v2001p3701d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1915p2235d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1915p2234d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v182Dp096Bd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1630p0005d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A9p0002d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v1435p0210d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v124Ap4023d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v107Bp55F2d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0DB0p6826d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CDEp0006d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BF8p1007d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v09AAp1000d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p4220d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p4210d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0846p4200d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083Ap5501d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083Ap4502d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v083Ap4501d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07AAp001Cd*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0707pEE06d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v06B9p0120d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0675p0530d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0506p0A11d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v045Ep00C2d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0411p0050d*dc*dsc*dp*ic*isc*ip*in*
depends: p54common,mac80211
intree: Y
vermagic: 3.8.2 SMP mod_unload modversions 586