TahrPup 5.8.4
I just created a fresh savefile and loaded that github woof-ce page in Pale Moon - and it displayed normally. Not sure what the difference would be, but the issue didn't happen on my system.
I also found I must be doing something very wrong in making SFS files of various programs. I used Puppy Package Manager to download (only download, not install) Audacity 2.0.5 and all dependencies. I extracted them all and made them into a SFS file. It wouldn't run from the SFS. But when I went back to PPM and installed them rather than download-only, Audacity works fine.
Same thing with Aqualung - putting it and all dependencies into SFS didn't work, but installing it through PPM works fine.
I hadn't run into that in Precise or Lucid before. Any hints from the experts on what I might be doing incorrectly?
I also found I must be doing something very wrong in making SFS files of various programs. I used Puppy Package Manager to download (only download, not install) Audacity 2.0.5 and all dependencies. I extracted them all and made them into a SFS file. It wouldn't run from the SFS. But when I went back to PPM and installed them rather than download-only, Audacity works fine.
Same thing with Aqualung - putting it and all dependencies into SFS didn't work, but installing it through PPM works fine.
I hadn't run into that in Precise or Lucid before. Any hints from the experts on what I might be doing incorrectly?
hi torgo,
when make sfs files from ubuntu libs .... you need to move any libs that are in /usr/lib/i386-linux-gnu to /usr/lib and delete the then empty i386-linux-gnu folder.
same applies to /lib/i386-linux-gnu & move the libs to /lib.
the i386-linux-gnu folders are just symlinks and it confuses sfsload or aufs.
pets don't have this problem, but i still move the libs out.
when make sfs files from ubuntu libs .... you need to move any libs that are in /usr/lib/i386-linux-gnu to /usr/lib and delete the then empty i386-linux-gnu folder.
same applies to /lib/i386-linux-gnu & move the libs to /lib.
the i386-linux-gnu folders are just symlinks and it confuses sfsload or aufs.
pets don't have this problem, but i still move the libs out.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
PaDS (by RSH) does it automatically.666philb wrote:hi torgo,
when make sfs files from ubuntu libs .... you need to move any libs that are in /usr/lib/i386-linux-gnu to /usr/lib and delete the then empty i386-linux-gnu folder.
same applies to /lib/i386-linux-gnu & move the libs to /lib.
the i386-linux-gnu folders are just symlinks and it confuses sfsload or aufs.
http://murga-linux.com/puppy/viewtopic.php?t=81511
Regards
Projet ASRI éducation => [url=http://asri-education.org/]Association[/url] | [url=http://forum.asri-education.org/]Forum[/url] | [url=http://dl01.asri-education.org/]Dépôt[/url] | [url=http://kids.asri-education.org/]Espace kids[/url]
Thanks for the SFS tip, 666philb. I'll also check out PaDS sometime, ASRI.
On the Pale Moon page display issue - the GitHub page for Woof-CE came up fine on one system using a clean savefile, but it had the bad display on another system where I had a bunch of other stuff already loaded.
It makes me wonder if there might be some kind of conflict that affects the page display.
On the Pale Moon page display issue - the GitHub page for Woof-CE came up fine on one system using a clean savefile, but it had the bad display on another system where I had a bunch of other stuff already loaded.
It makes me wonder if there might be some kind of conflict that affects the page display.
-
- Posts: 19
- Joined: Fri 01 Jun 2012, 16:50
- Location: Hungary
I modified /usr/local/pup_event/frontend_startup and it seems working. My desktop is clean now. Thx666philb wrote:hi bohocmasnibohocmasni wrote:Something puts a 'drives' icon to my desktop and cannot be disabled in desktop drive icon manager. (if I delete .pup_event/drive_drives, st rekreates it after X restart).
Any idea what script should I remove?
have a look a the scripts in /usr/local/pup_event
[url]http://www.youtube.com/watch?v=G6D1YI-41ao[/url]
Re: still doing very well
try right clicking on them and choose run in terminal. it should show you what's missing (or use the new LDD in right click). then in the PPM type what's missing into the find box (just the name) and install it with all dependencies. bit trip runner requires libopenaltorgo wrote:
Audacious (audio player) = works great
Audacity v2.0.0 (audio editor) = won't run
Aqualung (audio player, version from Oct 2012) = won't run
Google Chrome v37 = works
Opera 12.16 = works
a few games:
Wesnoth v1.8 (SFS I made for Lucid) = works
Konquest (SFS I made for Lucid) = works
Bit.Trip.Runner (commercial, purchased through Humble Bundle) = won't run
Gratuitous Space Battles (commercial) = works
Little Inferno (commercial) = won't run
Superhex (commercial) = works
Out Of The Park Baseball 14 = works
With Precise, the games Bit.Trip.Runner and Little Inferno will load on nearly any system, but the graphics scroll so slowly on many machines as to make them unplayable. That's what gave me the idea to test them in Tahr 5.8.4.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Tahr 5.8.4 live on another Nvidia box....non-HDMI All working on initial boot...even sound.
Code: Select all
# report-video
VIDEO REPORT: tahrpup, version 5.8.4
Chip description:
VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768x16
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri2 exa extmod fb glx kbd mouse shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
Code: Select all
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.397 FPS
300 frames in 5.0 seconds = 59.886 FPS
300 frames in 5.0 seconds = 59.881 FPS
300 frames in 5.0 seconds = 59.885 FPS
Code: Select all
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 4148MB (233MB used)
Machine Type : Physical machine
Operating System : tahrpup - 5.8.4
User Name : root (root)
Date/Time : Mon 13 Oct 2014 03:02:33 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Gallium 0.4 on NVA8
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : HDA-Intel - HDA NVidia
Audio Adapter : HDA-Intel - HDA NVidia
Audio Adapter : PC-Speaker - pcsp
I have 1.0.1i from Debian made into a pet which has been incorporated into LxPupTahr14.09 (downloaded 518 times) with no reports of problems....666philb wrote:updating to the 1.0.1.i version causes lots of problems in tahrpup .... however the 1.0.1f versionin trusty tahr is patched against heartbleed i believepeebee wrote:Hi 666philb
I do notice however that openssl version is reporting an old OpenSSL 1.0.1f 6 Jan 2014 whereas the up to date version is 1.0.1i...........
Let me know by pm if you'd like the pet.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Running LxPupTahr 14.09. Anything in particular I should try or look for? Basically it seems completely ok here in moderate normal daily use. I'm kind of alternating between it and X-Slacko 2.2n and Carolina with battleshooters 3.17 kernel so it's not fulltime use but it still gets exercised fairly often.peebee wrote:I have 1.0.1i from Debian made into a pet which has been incorporated into LxPupTahr14.09 (downloaded 518 times) with no reports of problems....666philb wrote:updating to the 1.0.1.i version causes lots of problems in tahrpup .... however the 1.0.1f versionin trusty tahr is patched against heartbleed i believepeebee wrote:Hi 666philb
I do notice however that openssl version is reporting an old OpenSSL 1.0.1f 6 Jan 2014 whereas the up to date version is 1.0.1i...........
Let me know by pm if you'd like the pet.
Cheers
peebee
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
Ok, got to the bottom of the fhsm bug in tahr with kernel-kit
sys/mmap.h is not in the "standard" (there is no effing standards these days ) path, so either set the path with a flag or make a symlink, or, maybe I can detect if you are running debian/ubuntu based pup and set the flag automagically. This is for future reference anyway, we'll wait and see where jamesbond goes with his fhsm development.
Just FYI, it resides in /usr/include/i386-linux-gnu/sys/mman.h (whereas aufs-util is looking in /usr/include/sys/mman.h).
Anyway, you might be interested in the petbuilds https://github.com/puppylinux-woof-CE/petbuilds. I like the rox one, gets the latest source, patches and makes pets with no intervention, which is how a build system should work . Fully tweakable too, just hack away. Slowly building up the inventory. The modded new2dir and dir2pet seem to work ok in tahr-584. More after some more testing.
By the way, the font wizard conflicts with font manager and should be removed.
sys/mmap.h is not in the "standard" (there is no effing standards these days ) path, so either set the path with a flag or make a symlink, or, maybe I can detect if you are running debian/ubuntu based pup and set the flag automagically. This is for future reference anyway, we'll wait and see where jamesbond goes with his fhsm development.
Just FYI, it resides in /usr/include/i386-linux-gnu/sys/mman.h (whereas aufs-util is looking in /usr/include/sys/mman.h).
Anyway, you might be interested in the petbuilds https://github.com/puppylinux-woof-CE/petbuilds. I like the rox one, gets the latest source, patches and makes pets with no intervention, which is how a build system should work . Fully tweakable too, just hack away. Slowly building up the inventory. The modded new2dir and dir2pet seem to work ok in tahr-584. More after some more testing.
By the way, the font wizard conflicts with font manager and should be removed.
Puppy Linux Blog - contact me for access
Upgrade from 5.3 rc to 5.4 with k-3.15.4....... no problems at all.
Code: Select all
# report-video
VIDEO REPORT: tahrpup, version 5.8.4
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri2 extmod glx kbd mouse
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
Code: Select all
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
375 frames in 5.0 seconds = 74.948 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.142 FPS
Code: Select all
-Computer-
Processor : 2x Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory : 2059MB (374MB used)
Machine Type : Physical machine
Operating System : tahrpup - 5.8.4
User Name : root (root)
Date/Time : Mon 13 Oct 2014 11:47:10 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
Audio Adapter : PC-Speaker - pcsp
Code: Select all
-Version-
Kernel : Linux 3.15.4 (i686)
Version : #1 SMP Mon Jul 7 16:46:57 BST 2014
C Library : GNU C Library version 2.19 (stable)
Distribution : tahrpup - 5.8.4
-Current Session-
Computer Name : puppypc21049
User Name : root (root)
Home Directory : /root
Desktop Environment : Unknown (Window Manager: JWM)
-Misc-
Uptime : 20 minutes
Load Average : 1.29, 0.77, 0.47
- Attachments
-
- Upgraded to 5.8.4.jpg
- (122.73 KiB) Downloaded 1205 times
MTP package for Tahr?
G'day,
Having a couple of Android devices (phone & tablet), I find it useful to download files to and from these and a computer.
Slacko generally works with the MTP-0.9 go-mtpfs .pet - sometimes need several runs to get a link rather than a red box ('error occurred').
But with either Android, I have been not able to get Tahrpup-5.8.4 to work with the .pet, ("no device" or "error occurred" red boxes) nor with two repository packages (Jmtpfs and mtpfs = both gives messages along the lines they cannot read a /.mtpfs-data directory as well as no device detected).
Has anyone been able to use an Android with a Tahr Pup, and if so, could a simple step-guide be given for the package used?
Other than this, Tahr Pup-5.8.4 is running very well on my desktops.
Thanks,
Having a couple of Android devices (phone & tablet), I find it useful to download files to and from these and a computer.
Slacko generally works with the MTP-0.9 go-mtpfs .pet - sometimes need several runs to get a link rather than a red box ('error occurred').
But with either Android, I have been not able to get Tahrpup-5.8.4 to work with the .pet, ("no device" or "error occurred" red boxes) nor with two repository packages (Jmtpfs and mtpfs = both gives messages along the lines they cannot read a /.mtpfs-data directory as well as no device detected).
Has anyone been able to use an Android with a Tahr Pup, and if so, could a simple step-guide be given for the package used?
Other than this, Tahr Pup-5.8.4 is running very well on my desktops.
Thanks,
Re: MTP package for Tahr?
Hi David,davids45 wrote:G'day,
Having a couple of Android devices (phone & tablet), I find it useful to download files to and from these and a computer.
Slacko generally works with the MTP-0.9 go-mtpfs .pet - sometimes need several runs to get a link rather than a red box ('error occurred').
But with either Android, I have been not able to get Tahrpup-5.8.4 to work with the .pet, ("no device" or "error occurred" red boxes) nor with two repository packages (Jmtpfs and mtpfs = both gives messages along the lines they cannot read a /.mtpfs-data directory as well as no device detected).
Has anyone been able to use an Android with a Tahr Pup, and if so, could a simple step-guide be given for the package used?
Other than this, Tahr Pup-5.8.4 is running very well on my desktops.
Thanks,
I decided to test this.
Samsung Galaxy S4 mini - Android-4.3 tested working
Nexus 7 2012 - Android-4.4.4 tested working
FWIW, my old samsung Galaxy W - cyanogenmod Android-4.4.3 was working well but I had to unlock the screen.
On some phones with 4.4 you may have to unlock the screen before plugging. I believe it's a security feature to protect from offline attack.
I'll attach the latest pet and status icon which has a new feature. If you are not connected to a network you are offered to use the phone's internet connection through USB0. I don't know how successful it will be but it is easy enough to use.
Have fun.
NB: go-mtpfs is required; see here and here.
- Attachments
-
- mtp_detect-0.15-noarch.pet
- the main program - REQUIRES go-mtpfs
- (12.77 KiB) Downloaded 564 times
-
- mtpstatus-0.3-i486.pet
- optional
- (4.08 KiB) Downloaded 367 times
Puppy Linux Blog - contact me for access
restart graphical server666philb wrote:hi linux28,linux28 wrote:TahrPup 5.8.4
sound Not normal
palemoon flase no sound
vlc Sound is intermittent
did the keyboard fail after restart on 5.8.3 or only after you tried those sound drivers i posted?
i had a similar thing with flash not working, and it was because i had set the soundcard using the tray and not using multiple soundcard wizard first. run the wizard and make note of the card number and then check that it matches in retrovol settings/config
after sound is set properly .... in vlc prefernces >>audio choose
alsa sound output>>> then choose default audio device probably
Later can't use the keyboard
Keyboard can not be used and the sound has nothing to do, is to restart the X server, the keyboard can not be used up.
Z87 motherboard.
Gmail-Phone plugin
Upgrade to 5.8.3 with the new 5.8.4
All went well without problems and so far all the previous programs work without issue!
The only issue I can find (and this was in 5.8.3 as well) is that the google plugin (downloaded in Gmail) for the Gmail Phone does not work! Tried both the 32 and 64 bit plugins and neither work in both pale moon and firefox browsers.
Probably not a big deal for most users but for me it is as Gmail-Phone is my ONLY long-distance phone!
>>>---Indian------>
All went well without problems and so far all the previous programs work without issue!
The only issue I can find (and this was in 5.8.3 as well) is that the google plugin (downloaded in Gmail) for the Gmail Phone does not work! Tried both the 32 and 64 bit plugins and neither work in both pale moon and firefox browsers.
Probably not a big deal for most users but for me it is as Gmail-Phone is my ONLY long-distance phone!
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Re: Gmail-Phone plugin
My 32 bit talkplugin is working in tahr 5.8.4: ever activate the plugin in firefox before trying. I installed first an old plugin with video accelerator and the latest:sszindian wrote: The only issue I can find (and this was in 5.8.3 as well) is that the google plugin (downloaded in Gmail) for the Gmail Phone does not work! Tried both the 32 and 64 bit plugins and neither work in both pale moon and firefox browsers.
>>>---Indian------>
http://www.murga-linux.com/puppy/viewto ... 821#788821