Fatdog64-700/701 [April 22 2015] [CLOSED]
eed the real 007 for this one!!
# service eztables start
Starting eztables...
iptables v1.4.21: invalid port/service `INPUT' specified
Try `iptables -h' or 'iptables --help' for more information.
****************************************************************************************
WARNING: An error occurred, see explanation for details, if any.
****************************************************************************************
No reason provided. Possible configuration file syntax error?
****************************************************************************************
Then in the terminal again
# iptables -L -n
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy DROP)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
#
Been to shield up again, a sea of green again except for 'ping'. Do I need to download the ISO again?
# service eztables start
Starting eztables...
iptables v1.4.21: invalid port/service `INPUT' specified
Try `iptables -h' or 'iptables --help' for more information.
****************************************************************************************
WARNING: An error occurred, see explanation for details, if any.
****************************************************************************************
No reason provided. Possible configuration file syntax error?
****************************************************************************************
Then in the terminal again
# iptables -L -n
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy DROP)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
#
Been to shield up again, a sea of green again except for 'ping'. Do I need to download the ISO again?
Works great now, thanks!jamesbond wrote:@SFR: thanks, fixed. The changes:
Thank you (and L18L) very much for getting into and resolving this issue for good.jamesbond wrote:the "charset" line in the keymaps
I work with consoles only occasionally, but I love that there is possibility of doing the most of work outside of X easily and OOTB: VLC (ncurses), screen, links, mc, an so on.
Very well chosen set of utilities was the very first thing that got me "glued" to FD, btw.
Thanks again &
Greetings!
[color=red][size=75][O]bdurate [R]ules [D]estroy [E]nthusiastic [R]ebels => [C]reative [H]umans [A]lways [O]pen [S]ource[/size][/color]
[b][color=green]Omnia mea mecum porto.[/color][/b]
[b][color=green]Omnia mea mecum porto.[/color][/b]
Kernel headers
Running the module complier script for VirtualBox guest extensions, now stuck - where are the linux headers needed for compiling modules? A search using gslapt defaults shows no candidates that I can see.
Print Failure in Fatdog64-700Final
Hi All,
I have been using fd64-631-Final since it’s release, as my daily workhorse, with much satisfaction. So first, many thanks to Kirk and Jamesbond and to all who contributed to it, for this fine O.S. I installed my new, Epson XP-211, Printer/Scanner, using the .pet drivers from: /fatdog/pets/contrib/600, and the Cups Wizard, version 1.5.3, with no problems. Printing and scanning are working well.
Meanwhile, I have been testing fd64-700b2 and now, since it’s release, fd64-700Final. I am very impressed with this ultimate version and want to upgrade to it. But to do so, I must have my Printer installed and functional, as I use it several times a day and cannot live without it! I have installed it effectively, using a USB cable and the same .pet drivers, with the right click procedure and Cups v.1.7.3, which instantly finds the Printer and presents the Driver at the top of a short list and permits installation. It ends up declaring: “Printer idle - waiting for jobs
I have been using fd64-631-Final since it’s release, as my daily workhorse, with much satisfaction. So first, many thanks to Kirk and Jamesbond and to all who contributed to it, for this fine O.S. I installed my new, Epson XP-211, Printer/Scanner, using the .pet drivers from: /fatdog/pets/contrib/600, and the Cups Wizard, version 1.5.3, with no problems. Printing and scanning are working well.
Meanwhile, I have been testing fd64-700b2 and now, since it’s release, fd64-700Final. I am very impressed with this ultimate version and want to upgrade to it. But to do so, I must have my Printer installed and functional, as I use it several times a day and cannot live without it! I have installed it effectively, using a USB cable and the same .pet drivers, with the right click procedure and Cups v.1.7.3, which instantly finds the Printer and presents the Driver at the top of a short list and permits installation. It ends up declaring: “Printer idle - waiting for jobs
http://distro.ibiblio.org/fatdog/sfs/70 ... 3.18.7.sfswhere are the linux headers needed for compiling modules?
Look at the Fatdog64 Seamonkey home page for instructions about using sfs files.
Yoliano,
There wasn't any changes to cups from b2 to final that I can think of. Kernel is different, which could affect usb, but I don't have a usb printer to test. Maybe someone with a usb printer could chime in. Might want to try again with another savefile or savefolder.
I found this a more useful page:kirk wrote:http://distro.ibiblio.org/fatdog/sfs/70 ... 3.18.7.sfswhere are the linux headers needed for compiling modules?
Look at the Fatdog64 Seamonkey home page for instructions about using sfs files.
http://distro.ibiblio.org/fatdog/web/
Anyway after installing the devx and the kernel-source sfs files I was able to get full screen display 1440x900 in VirtualBox.
Thanks!
Master Bond
All fixed, the firewall that is, all you have to do now is make a small Banking ISO CD with
1 all networking ( and firewall )
2 mpaint with snapshot
3 firefox
4 geany
5 whatever video drivers that are needed to display Bank, airline, ebay, bpay ect. fully functioning '
securely'
thanks, in advance
All fixed, the firewall that is, all you have to do now is make a small Banking ISO CD with
1 all networking ( and firewall )
2 mpaint with snapshot
3 firefox
4 geany
5 whatever video drivers that are needed to display Bank, airline, ebay, bpay ect. fully functioning '
securely'
thanks, in advance
I solved the problem by converting the PET file to a TXZ files now located on my site.smokey01 wrote:It's all looking good so far. Are there any Samsung drivers for printing and scanning model C1860FW.
http://smokey01.com/fd700/packages/sams ... x86_64.txz
http://smokey01.com/fd700/packages/sams ... x86_64.txz
hi jamesbond & kirk,
i'm trying to get chromebook touchpads working in tahrpup and have been told that they are working fine in fatdog. I was wondering if you could give me some pointers.
Also, where's fatdog 700s DOTconfig?
cheers
phil
i'm trying to get chromebook touchpads working in tahrpup and have been told that they are working fine in fatdog. I was wondering if you could give me some pointers.
Also, where's fatdog 700s DOTconfig?
cheers
phil
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
volume of sound
Me too.smokey01 wrote:Has anyone else noticed that the sound in Fatdog-700 is lower than the majority of other puppy distro's?
I have found a way to boost the sound a bit.
FD has alsa-equal installed which is an equalizer.
You do need to add the following lines to /usr/share/alsa/alsa.conf
I just put them at the end of the file. It might cause problems with other audio apps like mhwaveedit.
More info: http://www.murga-linux.com/puppy/viewtopic.php?t=66804
As a nicer front end you might be able to use pEqualizer.
http://murga-linux.com/puppy/viewtopic.php?t=81889
I just tried it in FD700 and it works fine without the additional lines in alsa.conf. Probably the safest option.
FD has alsa-equal installed which is an equalizer.
You do need to add the following lines to /usr/share/alsa/alsa.conf
Code: Select all
pcm.!default {
type hw
card 0
}
ctl.!default {
type hw
card 0
}
ctl.equal {
type equal;
}
pcm.plugequal {
type equal;
slave.pcm "plug:dmix";
}
pcm.!default {
type plug;
slave.pcm plugequal;
}
More info: http://www.murga-linux.com/puppy/viewtopic.php?t=66804
As a nicer front end you might be able to use pEqualizer.
http://murga-linux.com/puppy/viewtopic.php?t=81889
I just tried it in FD700 and it works fine without the additional lines in alsa.conf. Probably the safest option.
The best touch pad driver is here:i'm trying to get chromebook touchpads working in tahrpup and have been told that they are working fine in fatdog. I was wondering if you could give me some pointers.
Also, where's fatdog 700s DOTconfig?
https://github.com/hugegreenbug/xf86-input-cmt
but it does have problems with the physical right click button. So if you use that one you'll want to have tap to click enabled and right click by tapping with two fingers. I also have a patch for the synaptics driver, but it's not as good as this one. I'm out of town at the moment, using the c720 to type this. For the fatdog64 packages look at page 3 of this thread. The kernel config is located at /proc/config.gz and also in the kernel source sfs.
thanks kirk
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Kirk,
Thank you for your instant reply. I have accomplished your suggestion: I started 700F without savefile, then made the minimal configuration of locale, time, keyboard and internet connection. Downloaded and installed .pet Drivers. Opened Cups and installed Printer/Scanner. Tested Scanner with Xsane - worked OK. Replugged USB cable to Printer. In Cups, clicked on “Print Test Page
Thank you for your instant reply. I have accomplished your suggestion: I started 700F without savefile, then made the minimal configuration of locale, time, keyboard and internet connection. Downloaded and installed .pet Drivers. Opened Cups and installed Printer/Scanner. Tested Scanner with Xsane - worked OK. Replugged USB cable to Printer. In Cups, clicked on “Print Test Page
@smokey01 - in fatdog control panel, there is this "fatdog-set-defaul-soundcard". That tool can also be used to turn on/turn off the equaliser.
@Yoliano: in terminal, do this: "file /opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper" and what's the output. If you see something like "32-bit" there, then do this:
a) load 32-bit compatiblity sfs
b) from terminal: "service cups stop", then followed by "start32 service cups start"
Try printing again.
@Yoliano: in terminal, do this: "file /opt/epson-inkjet-printer-escpr/cups/lib/filter/epson-escpr-wrapper" and what's the output. If you see something like "32-bit" there, then do this:
a) load 32-bit compatiblity sfs
b) from terminal: "service cups stop", then followed by "start32 service cups start"
Try printing again.
Fatdog64 forum links: [url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Latest version[/url] | [url=https://cutt.ly/ke8sn5H]Contributed packages[/url] | [url=https://cutt.ly/se8scrb]ISO builder[/url]