Wine - run Windows programs in Linux

Virtual machines, emulation, etc.
Message
Author
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

#201 Post by version2013 »

No packages for wine 1.9.23.
Build fails when trying to compile with puppy431 and racy5.5.
https://bugs.winehq.org/show_bug.cgi?id=41705
The patch is in a different format than what I used in the past.
I am going to wait for 1.9.24.
User avatar
Marv
Posts: 1264
Joined: Wed 04 May 2005, 13:47
Location: SW Wisconsin

Wine 1.9.22 run as SFS

#202 Post by Marv »

I just shut down my last Windows machine. I had a few financial and quilt design programs that were only available under windows so I downloaded your version 1.9.22_v2.1 pet and it does exactly what is needed. Run on X-slacko 4.2 and LxPupSc 16.11.2 so far. I use it seldom so I didn't want to install it permanently so I tried the following and it worked well. Only a small (<2Mb) /root/.wine file remains on the OS it is run on after unloading. I'm sure there are other more elegant ways to do this but this works for my light occasional use. In the preliminary stages of this, I just ran the non-customized SFS and moved the .wine folder from /root to my EXT2 data partition and made a symlink to it in /root. That worked also.


Downloaded the pet, both extracted it to a dir and converted it to a SFS (in my EXT2 workdir).

Loaded that SFS, ran winecfg and added my programs to /root/.wine/drive_c/Program Files. Tested the programs.

Then moved /root/.wine into the extracted pet directory and converted that into an SFS (now has mono, gecko, and my programs on board).

That SFS loads and unloads cleanly in the two pups above, leaves only a small .wine file behind when unloaded, and is perfect for my occasional use.

Thanks for the pet and guidance. This was MUCH smoother than my previous wine tastings.

Edit: Also tested in X-tahr 2.0. Works fine on my progs.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 1.9.24

#203 Post by version2013 »

My attempt at compiling wine-1.9.24

[wine-1.9.24 mirrors]

wine-1.9.24_v1.1.pet ________ puppy 431 | stripped=true
wine-1.9.24_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-1.9.24_v1.1.pet ____ puppy 431 |
wine_DEV-1.9.24_v1.2.pet ____ puppy 431 |

wine-1.9.24_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-1.9.24_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-1.9.24_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-1.9.24_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-1.9.24.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.5/lcms2-2.5-i486_v2.pet [mirrors]
lcms2/2.5/lcms2_DEV-2.5-i486_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.5/lcms2-2.5-i486_v2.pet [mirrors]
lcms2/2.5/lcms2_DEV-2.5-i486_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------

https://bugs.winehq.org/show_bug.cgi?id=41869
https://bugs.winehq.org/attachment.cgi?id=56274
This patch is only applied to Racy5.5
Puppy431 build completed without a need for this patch.

----------------------------------------

When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
Last edited by version2013 on Sat 17 Dec 2016, 02:09, edited 1 time in total.
trlkly
Posts: 26
Joined: Mon 11 Oct 2010, 10:37

#204 Post by trlkly »

Any chance of getting the latest stable version with OSMesa support compiled in? I apparently have OSMesa6 10.1.0, if that matters.

I'm trying to get certain programs running that try to use OpenGL, and the error I get is that OSMesa is not compiled in.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

#205 Post by version2013 »

trlkly wrote:Any chance of getting the latest stable version with OSMesa support compiled in? I apparently have OSMesa6 10.1.0, if that matters.

I'm trying to get certain programs running that try to use OpenGL, and the error I get is that OSMesa is not compiled in.
If I can find the time, I will try to figure how to compile OSMesa and it's dependencies and have them compiled into a future build of Wine.

Does anyone know if this Mesa file [1] has the development headers for compiling?


[1] http://murga-linux.com/puppy/viewtopic. ... 944#866944
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 2.0-rc1

#206 Post by version2013 »

My attempt at compiling wine-2.0-rc1

[wine-2.0-rc1 mirrors]

wine-2.0-rc1_v1.1.pet ________ puppy 431 | stripped=true
wine-2.0-rc1_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.0-rc1_v1.1.pet ____ puppy 431 |
wine_DEV-2.0-rc1_v1.2.pet ____ puppy 431 |

wine-2.0-rc1_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.0-rc1_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.0-rc1_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.0-rc1_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.0-rc1.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.5/lcms2-2.5-i486_v2.pet [mirrors]
lcms2/2.5/lcms2_DEV-2.5-i486_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.5/lcms2-2.5-i486_v2.pet [mirrors]
lcms2/2.5/lcms2_DEV-2.5-i486_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 2.0-rc2

#207 Post by version2013 »

My attempt at compiling wine-2.0-rc2

[wine-2.0-rc2 mirrors]

wine-2.0-rc2_v1.1.pet ________ puppy 431 | stripped=true
wine-2.0-rc2_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.0-rc2_v1.1.pet ____ puppy 431 |
wine_DEV-2.0-rc2_v1.2.pet ____ puppy 431 |

wine-2.0-rc2_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.0-rc2_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.0-rc2_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.0-rc2_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.0-rc2.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.5/lcms2-2.5-i486_v2.pet [mirrors]
lcms2/2.5/lcms2_DEV-2.5-i486_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.5/lcms2-2.5-i486_v2.pet [mirrors]
lcms2/2.5/lcms2_DEV-2.5-i486_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 2.0-rc5

#208 Post by version2013 »

My attempt at compiling wine-2.0-rc5

[wine-2.0-rc5 mirrors]

----------------------------------------
EDIT
updated dependency: lcms2
----------------------------------------

wine-2.0-rc5_v1.1.pet ________ puppy 431 | stripped=true
wine-2.0-rc5_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.0-rc5_v1.1.pet ____ puppy 431 |
wine_DEV-2.0-rc5_v1.2.pet ____ puppy 431 |

wine-2.0-rc5_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.0-rc5_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.0-rc5_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.0-rc5_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.0-rc5.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------

https://bugs.winehq.org/show_bug.cgi?id=42211
http://source.winehq.org/git/wine.git/c ... 7b011f25e3
I applied this patch to both puppy 431 and Racy 5.5

----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
Last edited by version2013 on Sat 14 Jul 2018, 00:38, edited 1 time in total.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 2.0-rc6

#209 Post by version2013 »

My attempt at compiling wine-2.0-rc6

[wine-2.0-rc6 mirrors]

wine-2.0-rc6_v1.1.pet ________ puppy 431 | stripped=true
wine-2.0-rc6_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.0-rc6_v1.1.pet ____ puppy 431 |
wine_DEV-2.0-rc6_v1.2.pet ____ puppy 431 |

wine-2.0-rc6_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.0-rc6_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.0-rc6_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.0-rc6_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.0-rc6.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 2.0

#210 Post by version2013 »

My attempt at compiling wine-2.0

[wine-2.0 mirrors]

wine-2.0_v1.1.pet ________ puppy 431 | stripped=true
wine-2.0_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.0_v1.1.pet ____ puppy 431 |
wine_DEV-2.0_v1.2.pet ____ puppy 431 |

wine-2.0_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.0_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.0_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.0_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.0.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine-2.1

#211 Post by version2013 »

My attempt at compiling wine-2.1

[wine-2.1 mirrors]

wine-2.1_v1.1.pet ________ puppy 431 | stripped=true
wine-2.1_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.1_v1.1.pet ____ puppy 431 |
wine_DEV-2.1_v1.2.pet ____ puppy 431 |

wine-2.1_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.1_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.1_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.1_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.1.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
Illutorium
Posts: 170
Joined: Wed 06 Aug 2014, 07:12

Wine 2.2 [Tahr]

#212 Post by Illutorium »

Changes of WINE: https://www.winehq.org/announce/2.2
Info about a build: On to HTPC Laptop [A53U] it's goes at almost 3 hours.
Stripped/Optional Files:https://drive.google.com/open?id=0B-xgN ... 0hQNW5QR0E/https://drive.google.com/open?id=0B-xgN ... DdMdjhmVEE
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine 2.2

#213 Post by version2013 »

My attempt at compiling wine-2.2

[wine-2.2 mirrors]

wine-2.2_v1.1.pet ________ puppy 431 | stripped=true
wine-2.2_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.2_v1.1.pet ____ puppy 431 |
wine_DEV-2.2_v1.2.pet ____ puppy 431 |

wine-2.2_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.2_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.2_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.2_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.2.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet

--------

I applied the following commits/patches to puppy431 wine build:

bug 42478 | patch
bug 42483 | commit
bug 42547 | commit


------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

-------

I applied this commit to racy5.5 wine build:
bug 42483 | commit
----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
User avatar
01101001b
Posts: 123
Joined: Thu 09 Mar 2017, 01:20
Location: Buenos Aires, Argentina

Wine in pet?

#214 Post by 01101001b »

I didn't know there was available a .pet to install wine... and so recent version also :shock: Amazing. Thanks so much version2003! :)
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine-2.3

#215 Post by version2013 »

My attempt at compiling wine-2.3

[wine-2.3 mirrors]

wine-2.3_v1.1.pet ________ puppy 431 | stripped=true
wine-2.3_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.3_v1.1.pet ____ puppy 431 |
wine_DEV-2.3_v1.2.pet ____ puppy 431 |

wine-2.3_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.3_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.3_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.3_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.3.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet

--------

I applied the following commit/patch to puppy431 wine build:

bug 42478 | patch

------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]


----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine-2.4

#216 Post by version2013 »

My attempt at compiling wine-2.4

[wine-2.4 mirrors]

wine-2.4_v1.1.pet ________ puppy 431 | stripped=true
wine-2.4_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.4_v1.1.pet ____ puppy 431 |
wine_DEV-2.4_v1.2.pet ____ puppy 431 |

wine-2.4_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.4_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.4_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.4_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.4.pet

wine_extras-v2.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet

--------

I applied the following commit/patch to puppy431 wine build:

bug 42478 | patch

------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]


----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine-2.5

#217 Post by version2013 »

My attempt at compiling wine-2.5

[wine-2.5 mirrors]

wine-2.5_v1.1.pet ________ puppy 431 | stripped=true
wine-2.5_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.5_v1.1.pet ____ puppy 431 |
wine_DEV-2.5_v1.2.pet ____ puppy 431 |

wine-2.5_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.5_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.5_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.5_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.5.pet

wine_extras-v2.1.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet

--------

I applied the following commit/patch to puppy431 wine build:

bug 42478 | patch

------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]


----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
Last edited by version2013 on Wed 26 Apr 2017, 02:25, edited 1 time in total.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine thread was temporarily unavailable.

#218 Post by version2013 »

This Wine thread was temporarily unavailable.
The reasoning was because of spam posts.
Palemoon Thread gone
Thank you 'Makoto' for bringing this thread back.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine-2.6

#219 Post by version2013 »

My attempt at compiling wine-2.6

[wine-2.6 mirrors]

wine-2.6_v1.1.pet ________ puppy 431 | stripped=true
wine-2.6_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.6_v1.1.pet ____ puppy 431 |
wine_DEV-2.6_v1.2.pet ____ puppy 431 |

wine-2.6_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.6_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.6_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.6_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.6.pet

wine_extras-v2.1.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet

--------

I applied the following commits/patches to puppy431 wine build:

bug 42478 | patch
bug 42835 | patch1
bug 42835 | patch2

------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

--------

I applied the following commits/patches to racy5.5 wine build:

bug 42835 | patch1
bug 42835 | patch2

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
version2013
Posts: 503
Joined: Mon 09 Sep 2013, 00:00
Location: Florida, USA
Contact:

Wine-2.0.1

#220 Post by version2013 »

My attempt at compiling wine-2.0.1

[wine-2.0.1 mirrors]

wine-2.0.1_v1.1.pet ________ puppy 431 | stripped=true
wine-2.0.1_v1.2.pet ________ puppy 431 | stripped=false
wine_DEV-2.0.1_v1.1.pet ____ puppy 431 |
wine_DEV-2.0.1_v1.2.pet ____ puppy 431 |

wine-2.0.1_v2.1.pet ________ racy puppy 5.5 | stripped=true
wine-2.0.1_v2.2.pet ________ racy puppy 5.5 | stripped=false
wine_DEV-2.0.1_v2.1.pet ____ racy puppy 5.5 |
wine_DEV-2.0.1_v2.2.pet ____ racy puppy 5.5 |

wine_DOC-2.0.1.pet

wine_extras-v2.1.pet _____________ menu entries | mirrors
md5.txt and hashdeep.txt ________ checksums/hashes | mirrors

----------------------------------------------------------------
Notes for my webpage
http://version2013.yolasite.com/page1.php

The ">" character denotes a link to a mirror for either a directory or file.
ie. Look for the ">" adjacent to a
> directory/
> file

----------------------------------------------------------------

For general use, I recommend packages that are 'stripped=true'.
For submitting bug reports to WineHQ, I recommend packages that are 'stripped=false'.
When submitting bug reports to WineHQ, it appears a 'stripped=false' Wine provides more information than a 'stripped=true' Wine.
[references: post | page]

The first post has links to:
pet to sfs scripts, menu entry utilities, and Wine usage tips.

----------------------------------------------------------------------------------------------------------


----------------
puppy 431
----------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'

mirrors | /distro/4.3__1/puppies-431.1-main-Xserver.iso
mirrors | /distro/4.3__1/devx_430.sfs

This puplet uses glibc 2.6.1
The Wine files listing 'puppy 431' will possibly not work with a glibc before 2.6.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.7.1/fontconfig-2.7.1-i486-pup4.pet [mirrors]
fontconfig/2.7.1/fontconfig_DEV-2.7.1-i486-pup4.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libgphoto2/2.5.0/libgphoto2-2.5.0-i486_v2.pet [mirrors]
libgphoto2/2.5.0/libgphoto2_DEV-2.5.0-i486.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

libusb/1.0.9/libusb-1.0.9-i486_v2.pet [mirrors]
libusb/1.0.9/libusb_DEV-1.0.9-i486_v2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

xorg/7.3/xorg_xorg_full_dri-7.3.pet [mirrors]
xorg/7.3/xorg_xorg_full_dri_DEV-7.3.pet

------------------------------------

When compiling in puppy 431, I used:
v1.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v1.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------

-----------------------
racy puppy 5.5
-----------------------

I compiled using Racy 5.5

mirrors | /distro/racy5.5/racy-5.5.iso
mirrors | /distro/racy5.5/devx_racy_5.5.sfs

This puppy distro uses glibc 2.10.1
The Wine files listing 'racy5.5' will possibly not work with a glibc before 2.10.1
To see what glibc your puppy has.

Code: Select all

ldd --version
I installed the following packages, as one sfs file, before compiling;
also known as dependencies:

fontconfig/2.8.0/fontconfig-2.8.0-w5c.pet [mirrors]
fontconfig/2.8.0/fontconfig_DEV-2.8.0-w5c.pet

gmp/6.1.1/gmp-6.1.1-i486_v1.2.pet [mirrors]
gmp/6.1.1/gmp_DEV-6.1.1-i486_v1.2.pet

gnutls/3.5.2/gnutls-3.5.2_v1.2.pet [mirrors]
gnutls/3.5.2/gnutls_DEV-3.5.2.pet

lcms2/2.8/lcms2-2.8_v2.pet [mirrors]
lcms2/2.8/lcms2_DEV-2.8_v2.pet

libelf/0.8.13/libelf-0.8.13-i486_v2.pet [mirrors]
libelf/0.8.13/libelf_DEV-0.8.13-i486_v2.pet

libgcrypt/1.4.6/libgcrypt-1.4.6-i486-431.pet [mirrors]
libgcrypt/1.4.6/libgcrypt_DEV-1.4.6-i486-431.pet

libgpg-error/1.10/libgpg-error-1.10-i486-431.pet [mirrors]
libgpg-error/1.10/libgpg_DEV-error-1.10-i486-431.pet

libtasn1/4.8/libtasn1-4.8-i486_v1.2.pet [mirrors]
libtasn1/4.8/libtasn1_DEV-4.8-i486_v1.2.pet

mpg123/1.12.4/mpg123-1.12.4.pet [mirrors]
mpg123/1.12.4/mpg123_DEV-1.12.4.pet

nettle/3.2/nettle-3.2_v1.2.pet [mirrors]
nettle/3.2/nettle_DEV-3.2_v1.2.pet

openal-soft/1.13/openal-soft-1.13-i486_v1.1.pet [mirrors]
openal-soft/1.13/openal-soft_DEV-1.13-i486_v1.pet

openldap/2.4.13/openldap-2.4.13-i486.pet [mirrors]
openldap/2.4.13/openldap_DEV-2.4.13-i486.pet

prelink/20130503/prelink-20130503-i486_v2.pet [mirrors]

----------------------------------------


When compiling in racy puppy 5.5, I used
v2.1

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-O2"
v2.2

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x CFLAGS="-g -O0 -fno-optimize-sibling-calls -fno-omit-frame-pointer -fno-inline"
----------------------------------------------------------------------------------------------------------


Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' [post | page] provided by forum member 'technosaurus'.
I only made a few changes to the contents of that file.

----------------------------------------------------------------------------------------------------------

updated links at my homepage. see below.
Post Reply