Pupjibaro jessie Beta 5.
Hello all.
With the new poppler, etc. libraries, evince does work, but "Take a shot" cannot take a
screen shot of it. I had to use the tried and true < mtpaint -s > to get the attached.
So this is ¾ of a success! We continue!
Good luck Jose.
BFN.
With the new poppler, etc. libraries, evince does work, but "Take a shot" cannot take a
screen shot of it. I had to use the tried and true < mtpaint -s > to get the attached.
So this is ¾ of a success! We continue!
Good luck Jose.
BFN.
- Attachments
-
- half-success.jpg
- With the proper poppler lib, evince runs ok now. The error panel to the left is about the "Take a shot" utility: screenshots cannot be saved with "tas" at this time. Is it "tas" itself or the "perrito"?
- (66.01 KiB) Downloaded 720 times
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
librerias
ffmpeg-3.0.1
http://www.mediafire.com/download/kj4bj ... -3.0.1.pet
# MD5
854323b8a1148deab79b19db5be6cb43 ffmpeg-3.0.1.pet
# SHA1
230f4515ea98d9621a5238ff6e14c9074d865426 ffmpeg-3.0.1.pet
libparted2_3.2-7
http://www.mediafire.com/download/sy096 ... _3.2-7.pet
# MD5
4817347acbbee8d42ff827b9ce0ae0ae libparted2_3.2-7.pet
# SHA1
593615a482ce773b85d911a60996a330a7d17467 libparted2_3.2-7.pet
http://www.mediafire.com/download/kj4bj ... -3.0.1.pet
# MD5
854323b8a1148deab79b19db5be6cb43 ffmpeg-3.0.1.pet
# SHA1
230f4515ea98d9621a5238ff6e14c9074d865426 ffmpeg-3.0.1.pet
libparted2_3.2-7
http://www.mediafire.com/download/sy096 ... _3.2-7.pet
# MD5
4817347acbbee8d42ff827b9ce0ae0ae libparted2_3.2-7.pet
# SHA1
593615a482ce773b85d911a60996a330a7d17467 libparted2_3.2-7.pet
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
yad
yad-o.35.0
http://www.mediafire.com/download/2inwz ... 0.35.0.pet
# MD5
89df7a5565ae93b2a7dbcd2698772ddf yad-0.35.0.pet
# SHA1
467e535183fb69a0a20c5820c81e94dee095b86f yad-0.35.0.pet
http://www.mediafire.com/download/2inwz ... 0.35.0.pet
# MD5
89df7a5565ae93b2a7dbcd2698772ddf yad-0.35.0.pet
# SHA1
467e535183fb69a0a20c5820c81e94dee095b86f yad-0.35.0.pet
Re: yad
Thanks, Jose. Also for the other ones.josejp2424 wrote:yad-o.35.0
http://www.mediafire.com/download/2inwz ... 0.35.0.pet
# MD5
89df7a5565ae93b2a7dbcd2698772ddf yad-0.35.0.pet
# SHA1
467e535183fb69a0a20c5820c81e94dee095b86f yad-0.35.0.pet
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
Missing libraries problem all solved, from my end, anyway.
(Perhaps Jose has a few others to add.)
I found the remaining ones and assembled them in this lzip archive:
-- https://www.adrive.com/public/ezvAGa/bi ... s-3.zip.lz --
Contents of this one:and nothing shows up!
Full success, ladies and gentlemen, full sucess!
This is going to be a great "Perrito"!
BFN.
(Perhaps Jose has a few others to add.)
I found the remaining ones and assembled them in this lzip archive:
-- https://www.adrive.com/public/ezvAGa/bi ... s-3.zip.lz --
Contents of this one:
Now I type:biblios_manquantes-3
├── aaphoto_0.43.1-1+b2_i386.deb
├── libcdio12-0.82-5-rosa.lts2012.0.i586.rpm
├── libgcrypt11-1.5.3-3-rosa2014.1.i586.rpm
├── libgcrypt11-1.5.3-3-rosa2014.1.i586.rpm.extracted
│ ├── lib
│ │ ├── libgcrypt.so.11 -> libgcrypt.so.11.8.2
│ │ └── libgcrypt.so.11.8.2
│ └── usr
│ └── share
│ └── doc
│ └── libgcrypt11
│ ├── AUTHORS
│ ├── NEWS
│ ├── README
│ ├── THANKS
│ └── TODO
├── libjpeg7-7-5mdv2010.0.i586.rpm
├── libsoxr0-0.1.1-2-rosa2014.1.i586.rpm
├── libsoxr0-0.1.1-2-rosa2014.1.i586.rpm.extracted
│ └── usr
│ ├── lib
│ │ ├── libsoxr.so.0 -> libsoxr.so.0.1.0
│ │ └── libsoxr.so.0.1.0
│ └── share
│ └── doc
│ └── libsoxr0
│ ├── LICENCE
│ ├── NEWS
│ └── README
├── libswresample1-2.8.5-1-rosa2014.1.i586.rpm
├── libswresample1-2.8.5-1-rosa2014.1.i586.rpm.extracted
│ └── usr
│ └── lib
│ ├── libswresample.so.1 -> libswresample.so.1.2.101
│ └── libswresample.so.1.2.101
└── unrpm.pet
15 directories, 21 files
Code: Select all
cd /usr/bin
ldd * | grep "not found"
Full success, ladies and gentlemen, full sucess!
This is going to be a great "Perrito"!
BFN.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
gracias
oh yeah thanks musher0musher0 wrote:Missing libraries problem all solved, from my end, anyway.
(Perhaps Jose has a few others to add.)
I found the remaining ones and assembled them in this lzip archive:
-- https://www.adrive.com/public/ezvAGa/bi ... s-3.zip.lz --
.
No, it means that directory /var needs to have a sub-directory /games, like so:musher0 wrote:Hola.
Has anybody noticed if this Pup registers the scores of games?
Mine doesn't at all. Would that be a problem with "inotify"?
Astalavista.
Code: Select all
/var/games
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
There is definitely something wrong with the devx.
Even if I click on it to "Show Contents" it gives an error.
Is it possible to try creating the archive again?
If you have added or upgraded libraries you will need to add the headers and dev libs to the devx anyway.
I am very happy to know that it is possible to build a jessie pup with woof-CE so thanks to Jose for your work.
Even if I click on it to "Show Contents" it gives an error.
Is it possible to try creating the archive again?
If you have added or upgraded libraries you will need to add the headers and dev libs to the devx anyway.
I am very happy to know that it is possible to build a jessie pup with woof-CE so thanks to Jose for your work.
Oscar in England
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
desktop icons not translated after installing langpack_fr
Hi josejp2424,
tons of thanks for this pupjibaro-jessie !
here even boots OOTB on a intel PIV with 82845G Brookdale graphic controller !
i gave it a try installing the langpack_fr-20130304.pet from the puppy noarch repo:
- only the desktop icons are not translated: /root/Choices/ROX-Filer/PuppyPin is not translated to french.
I afterwards installed lang_pack_fr-0.6-w5.pet from shinobar's wary6 repo: got then /root/Choices/ROX-Filer/PuppyPin.fr installed; I then did
in a terminal and restarted X; no change
note: i did this in RAM, without creating a pupsave file.
Did I have missed something ?
Thanks for any advice
Cheers, Charlie.
tons of thanks for this pupjibaro-jessie !
here even boots OOTB on a intel PIV with 82845G Brookdale graphic controller !
i gave it a try installing the langpack_fr-20130304.pet from the puppy noarch repo:
- only the desktop icons are not translated: /root/Choices/ROX-Filer/PuppyPin is not translated to french.
I afterwards installed lang_pack_fr-0.6-w5.pet from shinobar's wary6 repo: got then /root/Choices/ROX-Filer/PuppyPin.fr installed; I then did
Code: Select all
# fixPuppyPin
note: i did this in RAM, without creating a pupsave file.
Did I have missed something ?
Thanks for any advice
Cheers, Charlie.
@Charlie6:
I think your note is the clue. IIRC, you need to create a pupsave file before installing any pet,
not just the language pack pet. That's what I do, anyway.
(Come to think of it, maybe the pupsave is necessary before you can load any sfs's...)
BFN.
I think your note is the clue. IIRC, you need to create a pupsave file before installing any pet,
not just the language pack pet. That's what I do, anyway.
(Come to think of it, maybe the pupsave is necessary before you can load any sfs's...)
BFN.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
Hola, Oscar, José and all.OscarTalks wrote:There is definitely something wrong with the devx.
Even if I click on it to "Show Contents" it gives an error.
Is it possible to try creating the archive again?
If you have added or upgraded libraries you will need to add the headers and dev libs to the devx anyway.
I am very happy to know that it is possible to build a jessie pup with woof-CE so thanks to Jose for your work.
FWIW, here is the result of a couple of diagnostic runs with fsck on the devx.
I thought it could give us some pointers.
Code: Select all
[/initrd/mnt/...essie-beta]>fsck.ext4 devx_jessie_6.4.0.sfs
e2fsck 1.42.12 (29-Aug-2014)
ext2fs_open2: Bad magic number in super-block
fsck.ext4: Superblock invalid, trying backup blocks...
fsck.ext4: Bad magic number in super-block while trying to open devx_jessie_6.4.0.sfs
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
[/initrd/mnt/...essie-beta]>fsck.ext4 -b 8193 devx_jessie_6.4.0.sfs
e2fsck 1.42.12 (29-Aug-2014)
fsck.ext4: Attempt to read block from filesystem resulted in short read while trying to open devx_jessie_6.4.0.sfs
Could this be a zero-length partition?
[/initrd/mnt/...essie-beta]>fsck.ext4 -b 32768 devx_jessie_6.4.0.sfs
e2fsck 1.42.12 (29-Aug-2014)
fsck.ext4: Attempt to read block from filesystem resulted in short read while trying to open devx_jessie_6.4.0.sfs
Could this be a zero-length partition?
Astalavista.
musher0
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
~~~~~~~~~~
"You want it darker? We kill the flame." (L. Cohen)
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
devx
hi musher0.
nuevo devx y pupjibaro jessie en el foro oficial.
http://www.murga-linux.com/puppy/viewtopic.php?t=106334.
nuevo devx y pupjibaro jessie en el foro oficial.
http://www.murga-linux.com/puppy/viewtopic.php?t=106334.
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
librerias
pronto sacare un update con las librerias que me proporciono.
por ahora hice una iso nueva con errores corregidos.
esta el archivo delta para no descargar toda la iso.
por ahora hice una iso nueva con errores corregidos.
esta el archivo delta para no descargar toda la iso.