So, i'm fighting with xorg.conf since hours, triing to enrich it with lines I take from an xorg.conf that works on my machine with ubuntu. I join the loast xorg.conf file which doesn't prevent X from working ... but still doesn't show me the bottom of page !
please help !
Code: Select all
#Special base config file used in Puppy Linux.
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
# This loads xtrap extension, used by xrandr
Load "xtrap"
# This loads the GLX module (if present)
Load "glx"
# This loads dri module (if present)
Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R7/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...
Option "RandR" "on"
EndSection
#everything past here is auto-generated by Puppy's Xorg Wizard...
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "fr" #xkeymap0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 25-50
VertRefresh 50-75
DisplaySize 176 100
UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "1024x600"
Option "dpms"
EndSection
Section "Modes"
Identifier "Modes0"
#modes0modeline0
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync
Modeline "800x480" 33.45 800 840 968 1056 480 490 492 525 -hsync -vsync
Modeline "1024x768" 64.56 1024 1056 1296 1328 768 783 791 807 -hsync +vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoCompression" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "TV" # [<str>]
#Option "TV_Output" # [<str>]
#Option "TVOverscan" # [<str>]
#Option "TV_Encoder" # [<str>]
#Option "TV_Bus_Fmt" # [<str>]
#Option "TV_Flags" # [<str>]
#Option "TV_601_Flags" # [<str>]
#Option "TV_Vsync_Select" # [<str>]
#Option "TV_Conversion" # [<str>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "FlatPanel" # [<bool>]
#Option "CrtEnable" # [<bool>]
#Option "ColorKey" # <i>
#Option "OSMImageBuffers" # <i>
#Option "OSMColorExpBuffers" # <i>
#Option "CustomMode" # [<bool>]
#Option "FPDestGeom" # [<str>]
#Option "FPActiveGeom" # [<str>]
Identifier "Card0"
Driver "geode" #card0driver
VendorName "Advanced Micro Devices [AMD]"
BoardName "Geode LX Video"
BusID "PCI:0:1:1"
Option "PanelGeometry" "800x480"
Option "NoDDC" "true"
Option "PanelMode" "33450 800 840 968 1056 480 490 492 525"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x600" "800x480"
#Modes "1024x768" "1024x600" "800x480"
EndSubsection
EndSection
#PuppyHardwareProfile=Advanced_Micro_Devices
