Insidious Puppy 001

For talk and support relating specifically to Puppy derivatives
Message
Author
jplt

#41 Post by jplt »

Hi,

i have a gigabyte usb keyboard but it didn't
work when i boot in the desktop ?
Last edited by jplt on Mon 29 Nov 2010, 20:12, edited 1 time in total.
User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

internet connection lost after reboot

#42 Post by Béèm »

On reboot I didn't have my internet connection back I did setup and had to do it again.
Then I saw that when I had setup the connection in the first boot, the wireless device was eth0 (very unusual here)
Now after the reboot it was eth1 and configured again.
Will see at the next reboot what will happen.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
Consult Wikka
Use peppyy's puppysearch
User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Insidious Puppy 001

#43 Post by Billtoo »

I have 001 installed to a flashdrive with bootflash.
I started out on my newer hp computer and installed the devx and
kernel source sfs from page one but when I exited to the prompt and
ran the commercial ati driver
ati-driver-installer-10-10-x86.x86_64.run there were errors and the
flgrx driver wouldn't work so:

I booted up the flash drive on my 3 year old acer with nvidia graphics
and I downloaded and installed your nvidia-260.19.21-k2.6.32.26.pet
and:
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
33393 frames in 5.0 seconds = 6678.534 FPS
27770 frames in 5.0 seconds = 5553.938 FPS
31423 frames in 5.0 seconds = 6284.523 FPS
29832 frames in 5.0 seconds = 5966.399 FPS
27271 frames in 5.0 seconds = 5454.153 FPS
#
anyhow, it's running very well on the acer, fast!

Edit: I'll attach the error.log from trying to install the ati driver.

Edit: retrovol is broken, if I try to run it from the console it gives a segmentation fault.
Attachments
fglrx-install.log.gz
(744 Bytes) Downloaded 755 times
Last edited by Billtoo on Tue 30 Nov 2010, 00:28, edited 2 times in total.
Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#44 Post by Jim1911 »

Super! It's fast, stable, and works great.

These applications have been added and most work properly:
  • === /initrd/tmp/EXTRASFSS ===
    amarok-1.4-lucid.sfs
    Bibletime_lucid-2.7.2a.sfs
    java_jre-6u22-Lucid-sfs4.sfs
    LibreOffice_3.3.0_beta2a_sfs4.sfs
    === User Installed Pkgs (PPM) ===
    Package Description
    gnome-games-Lite_2.26.1-i486-dpup Gnome Games
    libclucene0ldbl-0.9.21b-2+b1 library for full-featured text search engine (runtime)
    libgtkhtml3.14-19-3.30.3-1 HTML rendering/editing library - runtime files
    libgtkhtml-editor-common-3.30.3-1 HTML rendering/editing library - editor widget data
    libicu44-4.4.2-2 International Components for Unicode
    libsword8-1.6.1+dfsg-2+b1 API/library for bible software
    xiphos-3.1.3-3 environment for Bible reading, study, and research
    xiphos-data-3.1.3-3 data files for Xiphos Bible study software
    libgtkhtml-editor0-3.30.3-1 HTML rendering/editing library - editor widget
    xiphos-3.1.3-3 environment for Bible reading, study, and research
    aurora-jwm-theme-001 aurora jwm theme
    nvidia-260.19.21-k2.6.32.26 nvidia gpu drivers
    flashplayer-10.1.102.64 adobe flash player
    fbreader-0.12.8 FBReader E-book reader
    liblinebreak-1.2
    Acrobat_Reader-9.3.3-Lucid Adobe Acrobat Reader PDF application
    bluefish-2.0.2 Bluefish text editor
    edit_sfs-2.1 Edit .sfs files
    Firefox-4.0b7-Lucid Firefox web browser
    hplip-3.9.12-scan HP Scanner Drivers
    LHP_sys_info-0.3 Lighthouse System Information & Video Report
    Pet_Maker-1.7-3-430 Pet Maker Plus
    pwidgets-2.3.1 Pwidgets tiny desktop apps
    snap2-4.17 snap2 snapshot backup now!
    Startmount-0.5.3 Startmount Mount drives and programs at start
    sunbird_1.0b1-1.0b1 Sunbird personal organizer
    thunderbird-3.1 e-mail client
    Wbar_with_setup-1.3.3-Lucid Wbar Setup -adjust wbar settings
    PupApps-1.1 PupApps launcher
    PupClockset-1.0 PupClockset utility
    PupControl-1.1 PupControl panel
    PupShutdown-1.4 PupShutdown manager
    PupSnap-1.1 PupSnap screen capture
    scrot_0.8-13 scrot CLI screen capture
Problems with added programs:
1. One of my favorite addons, Wbar, will not start. 01micko's fine Wbar-setup appears to function perfectly except for starting Wbar. NOTE: Removing Quickpet, one of the default applications called by Wbar which isn't present in insidious, allows Wbar to work properly.
2. Pwidgets only partially works, however that's also a problem with luci-240.

Cheers,
Jim
Attachments
desktop.jpg
(151.83 KiB) Downloaded 966 times
Last edited by Jim1911 on Mon 29 Nov 2010, 23:33, edited 1 time in total.
Fishy
Posts: 234
Joined: Fri 27 Jan 2006, 01:22

Frugal Install Issue

#45 Post by Fishy »

I tried frugal install using pfix=ram. Universal installer says sdb1 where I place installs is mounted or mounted read only and will not proceed. Checked icon and said to unmount all partitions. Used Gparted to check and unmount swap file so as far as I can tell all everything is umounted but no go. Pmount shows nothing on SDB mounted.

I have deleted inpu save file as well to be on safe side. I am typing this from inpu now but somewhat confused as to issue - probably something simple.

Assist required :lol:
User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#46 Post by edoc »

Which PET or SFS of OpenOffice is recommended for use with Insidious, please?

I started to load the openoffice-3.2.1.9502_en.US.pet but the pop-up warned about installing to /mnt/home

BTW: That error message includes a misspelled word.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
sneekylinux
Posts: 61
Joined: Fri 20 Mar 2009, 19:49
Location: dorset,uk

#47 Post by sneekylinux »

have a video for you on the tube guys....
User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#48 Post by 01micko »

Jim1911 wrote: Problems with added programs:
1. One of my favorite addons, Wbar, will not start. 01micko's fine Wbar-setup appears to function perfectly except for starting Wbar.
2. Pwidgets only partially works, however that's also a problem with luci-240.

Cheers,
Jim
hmmmm... wbar is not one size fits all, I bet a program is missing/changed. I may have to make a simpler version with apps we know will be in puppy.

As for pwidgets I can't reproduce your problems Jim.. I will still investigate.

__________________________________

I also had Billtoo's kernel source problem trying to compile nvidia-173.XX.XX.. maybe just a symlink.

__________________________________

Xfce gtk themes don't play nice sometimes. It's a known issue in luci

Cheers
Puppy Linux Blog - contact me for access
Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#49 Post by Jim1911 »

edoc wrote:Which PET or SFS of OpenOffice is recommended for use with Insidious, please?

I started to load the openoffice-3.2.1.9502_en.US.pet but the pop-up warned about installing to /mnt/home

BTW: That error message includes a misspelled word.
Try LibreOffice, OpenOffice.org's spinoff. It works fine on incidious.
Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#50 Post by Jim1911 »

01micko wrote:
Jim1911 wrote: Problems with added programs:
1. One of my favorite addons, Wbar, will not start. 01micko's fine Wbar-setup appears to function perfectly except for starting Wbar.
2. Pwidgets only partially works, however that's also a problem with luci-240.

Cheers,
Jim
hmmmm... wbar is not one size fits all, I bet a program is missing/changed. I may have to make a simpler version with apps we know will be in puppy.

As for pwidgets I can't reproduce your problems Jim.. I will still investigate.

__________________________________

I also had Billtoo's kernel source problem trying to compile nvidia-173.XX.XX.. maybe just a symlink.

__________________________________

Xfce gtk themes don't play nice sometimes. It's a known issue in luci

Cheers
Why didn't I think of that? :oops: Quickpet is the culprit. Wbar starts fine with that removed.

Apparently, I have a hardware conflict. I've tried Pwidgets as the only added program so there isn't a program conflict. Others have reported no problem with pwidgets.

Thanks,
Jim
User avatar
tubeguy
Posts: 1320
Joined: Sat 29 Aug 2009, 01:04
Location: Park Ridge IL USA
Contact:

#51 Post by tubeguy »

sneekylinux wrote:have a video for you on the tube guys....
Nice!
http://www.youtube.com/watch?v=FSFJpzyOVcI
[b]Tahr Pup 6 on desktop, Lucid 3HD on lappie[/b]
User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

Re: Thanks!

#52 Post by 01micko »

Guess what... pupRadio works! Weird eh? Teh Insidious Puppeh is looking the goods!

Cheers
Puppy Linux Blog - contact me for access
User avatar
Iguleder
Posts: 2026
Joined: Tue 11 Aug 2009, 09:36
Location: Israel, somewhere in the beautiful desert
Contact:

#53 Post by Iguleder »

sneekylinux wrote:have a video for you on the tube guys....
Nice review, thanks :)

I added PupRadio back, it fixed itself magically, just like the GNOME-MPlayer fullscreen bug :lol:

I think I'll build a 002 and write a full guide for building it during the process. I found a serious bug in my deb2ppm script, which screws up dependencies in PPM a 'lil bit.
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
aragon
Posts: 1698
Joined: Mon 15 Oct 2007, 12:18
Location: Germany

#54 Post by aragon »

iguleder,

just to let you know about an xlock bug that happens in insi (but i think it's woof):
http://www.murga-linux.com/puppy/viewto ... 400#472400

aragon
User avatar
Iguleder
Posts: 2026
Joined: Tue 11 Aug 2009, 09:36
Location: Israel, somewhere in the beautiful desert
Contact:

#55 Post by Iguleder »

Hey guys, here's the solution to the package lists problem. I uploaded it only for passionate testers :lol:

Before you run this one, do

Code: Select all

rm /root/.packages/Packages-*
Then restart X or run /root/Startup/download_package_lists. It will download a small xz-compressed tar archive with the package lists that came with 001. Around 1 MB in size ... it's great.

EDIT: the 1.2 MB size is because of the xz compression. In the Insidious ISO, I'm pretty sure they take way more.

I want 002 to have this thing instead of the package lists, they're big. I could make this script download Debian package lists and process them, but that would require a fast PC with Bash code or the devx if I want to use my deb2ppm script (for Perl).

EDIT: had a crazy idea ... what if I wrote a script that compares two SFSs, then takes all the extra files from the second one, puts them in a directory and writes a pinstall.sh that removes all files that don't exist in it ... this could be sort of a primitive updating mechanism - I could turn this into a PET and make this dialog also download and install so-called "updates".
Attachments
download_package_lists-001.pet
(1.09 KiB) Downloaded 424 times
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
User avatar
Iguleder
Posts: 2026
Joined: Tue 11 Aug 2009, 09:36
Location: Israel, somewhere in the beautiful desert
Contact:

#56 Post by Iguleder »

Another idea. I also replied in Barry's blog with this one.

I could make all the special stuff in Insidious much more generic with a homepage field in DISTRO_SPECS.

For example, the package list could be downloaded from:

Code: Select all

$DISTRO_REPOSITORY/$DISTRO_FILE_PREFIX-$DISTRO_VERSION/Packages.tar.gz
In the case of Insidious Puppy 001:

Code: Select all

http://brainwavedesigncentral.net/dima/inpu-001/Packages.tar.gz
In the case of Lucid Puppy 5.2:

Code: Select all

http://distro.ibiblio.org/pub/linux/distributions/puppylinux/lupu-520/Packages.tar.gz
In the case of Wary 098:

Code: Select all

http://www.bkhome.org/wary-098/Packages.tar.gz
The distro homepage variable could be used for many other things, the possibilties are endless.

This opens the door to smaller puppies that download non-crucial parts such as documentation and locales if the user wants to. Of course, this could be done through PPM, but what if it's a puplet or a Puppy that doesn't have its own repository? That's where this trick shines :P

This could be used for "service packs", Quickpet and so many other uses ... I think it's a great idea.
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
User avatar
abushcrafter
Posts: 1418
Joined: Fri 30 Oct 2009, 16:57
Location: England
Contact:

#57 Post by abushcrafter »

What about this for a home page: http://puppy.b0x.me/psearch.html
[url=http://www.adobe.com/flashplatform/]adobe flash is rubbish![/url]
My Quote:"Humans are stupid, though some are clever but stupid." http://www.dependent.de/media/audio/mp3/System_Syn_Heres_to_You.zip http://www.systemsyn.com/
User avatar
Iguleder
Posts: 2026
Joined: Tue 11 Aug 2009, 09:36
Location: Israel, somewhere in the beautiful desert
Contact:

#58 Post by Iguleder »

What about this as /usr/local/bin/defaultbrowser?

Code: Select all

#!/bin/busybox ash

if [ ! -d /root/.mozilla ]; then

  exec /usr/bin/iceape "http://puppy.b0x.me/psearch.html $@"

else

   exec /usr/bin/iceape "$@"

fi
Should make the browser open on this page when you first start it ... well, theoretically. Not sure if it really works.
[url=http://dimakrasner.com/]My homepage[/url]
[url=https://github.com/dimkr]My GitHub profile[/url]
User avatar
tubeguy
Posts: 1320
Joined: Sat 29 Aug 2009, 01:04
Location: Park Ridge IL USA
Contact:

#59 Post by tubeguy »

abushcrafter wrote:What about this for a home page: http://puppy.b0x.me/psearch.html
Love it, bookmarked. Nice job.
[b]Tahr Pup 6 on desktop, Lucid 3HD on lappie[/b]
User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Insidious Puppy 001

#60 Post by Billtoo »

I found this wallpaper, looks kind of nerdy.

Fresh install of sid pup on acer revo, working good so far.
Post Reply